PS22A74 Datasheet, PDF (5/11 Pages) Mitsubishi Electric Semiconductor – Dual-In-Line Package Intelligent Power Module

< Dual-In-Line Package Intelligent Power Module >
PS22A74
TRANSFER MOLDING TYPE
INSULATED TYPE
MECHANICAL CHARACTERISTICS AND RATINGS
Parameter
Condition
Mounting torque
Mounting screw : M4
Terminal pulling strength
Load 19.6N
Terminal bending strength
Load 9.8N, 90deg. bend
Weight
Heat-sink flatness
Note 6: Measurement point of heat-sink flatness
Recommended 1.18N·m
EIAJ-ED-4701
EIAJ-ED-4701
(Note 6)
Min.
0.98
10
2
-
-50
Limits
Typ.
1.18
-
-
46
-
Max.
1.47
-
-
-
100
Unit
N·m
s
times
g
μm
RECOMMENDED OPERATION CONDITIONS
Symbol
Parameter
Condition
Limits
Min. Typ.
VCC
Supply voltage
Applied between P-NU, NV, NW
350
600
VD
Control supply voltage
Applied between VP1-VPC, VN1-VNC
13.5 15.0
VDB
Control supply voltage
Applied between VUFB-VUFS, VVFB-VVFS, VWFB-VWFS
13.0 15.0
ΔVD, ΔVDB Control supply variation
tdead
Arm shoot-through blocking time For each input signal
-1
-
3.0
-
fPWM
PWM input frequency
TC ≤ 100°C, Tj ≤ 125°C
-
-
VCC = 600V, VD = 15V, P.F = 0.8,
f_PWM= 5kHz
IO
Allowable r.m.s. current
Sinusoidal PWM
TC ≤ 100°C, Tj ≤ 125°C
(Note 7) ^fPWM^{= 15kHz}
-
-
-
-
PWIN(on)
(Note 8) 2.0
-
Minimum input pulse width
PWIN(off)
350≤ VCC ≤ 800V, 13.5≤ VD ≤ 16.5V,
13.0≤ VDB ≤ 18.5V, -20°C ≤ TC ≤ 100°C,
IC≤15A
2.5
-
N line wiring inductance less than 10nH
(Note 9)
15A<IC≤25.5A
2.9
-
VNC
VNC variation
Between VNC-NU, NV, NW (including surge)
-5.0
-
Tj
Note
Junction temperature
-20
-
7: The allowable r.m.s. current value depends on the actual application conditions.
8: DIPIPM might not make response to the input on signal with pulse width less than PWIN (on).
9: IPM might make no response or delayed response (P-side IGBT only) for the input signal with off pulse width less than PWIN(off).
Please refer Fig. 3 about delayed response.
Fig. 3 About Delayed Response Against Shorter Input Off Signal Than PWIN(off) (P-side only)
Max.
800
16.5
18.5
+1
-
20
8.1
5.5
-
-
-
+5.0
+125
Unit
V
V
V
V/μs
μs
kHz
Arms
μs
V
°C
P-side Control Input
Internal IGBT Gate
Output Current Ic
t2
t1
Solid line
Broken line
…Off pulse width ≥ PWIN(off);
Turn on time t1 (Normal delay)
…Off pulse width < PWIN(off);
Turn on time t2 (Longer delay in some cases)
Publication Date : January 2012
5