English
Language : 

CM1000HA-24H Datasheet, PDF (2/4 Pages) Mitsubishi Electric Semiconductor – HIGH POWER SWITCHING USE INSULATED TYPE
◁
MITSUBISHI IGBT MODULES
CM1000HA-24H
HIGH POWER SWITCHING USE
INSULATED TYPE
Absolute Maximum Ratings, Tj = 25 °C unless otherwise specified
Ratings
Symbol
Junction Temperature
Storage Temperature
Collector-Emitter Voltage (G-E SHORT)
Gate-Emitter Voltage (C-E SHORT)
Collector Current (TC = 25°C)
Peak Collector Current (Tj ≤ 150°C)
Emitter Current** (TC = 25°C)
Peak Emitter Current**
Maximum Collector Dissipation (TC = 25°C)
Mounting Torque, M8 Main Terminal
Tj
Tstg
VCES
VGES
IC
ICM
IE
IEM
Pc
–
Mounting, Torque M6 Mounting
–
Mounting, Torque M4 Terminal
–
Weight
–
Isolation Voltage (Main Terminal to Baseplate, AC 1 min.)
Viso
*Pulse width and repetition rate should be such that the device junction temperature (Tj) does not exceed Tj(max) rating.
**Represents characteristics of the anti-parallel, emitter-to-collector free-wheel diode (FWDi).
Static Electrical Characteristics, Tj = 25 °C unless otherwise specified
Characteristics
Symbol
Test Conditions
Collector-Cutoff Current
ICES
VCE = VCES, VGE = 0V
Gate Leakage Current
IGES
VGE = VGES, VCE = 0V
Gate-Emitter Threshold Voltage
VGE(th)
IC = 100mA, VCE = 10V
Collector-Emitter Saturation Voltage
VCE(sat)
IC = 1000A, VGE = 15V
IC = 1000A, VGE = 15V, Tj = 150°C
Total Gate Charge
QG
VCC = 600V, IC = 1000A, VGE = 15V
Emitter-Collector Voltage
VEC
IE = 1000A, VGE = 0V
** Pulse width and repetition rate should be such that device junction temperature rise is negligible.
Dynamic Electrical Characteristics, Tj = 25 °C unless otherwise specified
Characteristics
Symbol
Test Conditions
Input Capacitance
Cies
Output Capacitance
Coes
VGE = 0V, VCE = 10V
Reverse Transfer Capacitance
Cres
Resistive
Turn-on Delay Time
td(on)
Load
Switching
Rise Time
Turn-off Delay Time
tr
td(off)
VCC = 600V, IC = 1000A,
VGE1 = VGE2 = 15V, RG = 3.3Ω
Time
Fall Time
tf
Diode Reverse Recovery Time
trr
IE = 1000A, diE/dt = –2000A/µs
Diode Reverse Recovery Charge
Qrr
IE = 1000A, diE/dt = –2000A/µs
CM1000HA-24H
–40 to +150
–40 to +125
1200
±20
1000
2000*
1000
2000*
5800
8.83 ~ 10.8
1.96 ~ 2.94
0.98 ~ 1.47
1600
2500
Units
°C
°C
Volts
Volts
Amperes
Amperes
Amperes
Amperes
Watts
N·m
N·m
N·m
Grams
Vrma
Min.
Typ.
Max. Units
–
–
6
mA
–
–
0.5
µA
4.5
6.0
7.5
Volts
–
2.7
3.6** Volts
–
2.4
–
Volts
–
5000
–
nC
–
–
3.5
Volts
Min.
Typ.
Max. Units
–
–
200
nF
–
–
70
nF
–
–
40
nF
–
–
600
ns
–
–
1500
ns
–
–
1200
ns
–
–
350
ns
–
–
250
ns
–
7.4
–
µC
Thermal and Mechanical Characteristics, Tj = 25 °C unless otherwise specified
Characteristics
Symbol
Test Conditions
Min.
Thermal Resistance, Junction to Case
Rth(j-c)
Per IGBT
–
Thermal Resistance, Junction to Case
Rth(j-c)
Per FWDi
–
Contact Thermal Resistance
Rth(c-f)
Per Module, Thermal Grease Applied
–
Typ. Max. Units
–
0.022 °C/W
–
0.050 °C/W
–
0.018 °C/W
Sep.1998
 ▷