MT93L16 Datasheet, PDF (7/27 Pages) Mitel Networks Corporation – CMOS Low-Voltage Acoustic Echo Canceller

Preliminary Information
MT93L16
C4i
start of frame (stbus & GCI)
F0i (ST-BUS)
0
1
2
B
F0i (GCI)
3
4
PORT1
Rin
76 543210
EC
Sout
76 543210
PORT2
Sin
Rout
76 543210
EC
76 543210
outputs = High impedance
inputs = don’t care
In ST-BUS/GCI Mode 2, echo canceller I/O channels are assigned to ST-BUS/GCI timeslot 2. Note that the user can configure PORT1
and PORT2 into different modes.
Figure 4 - ST-BUS and GCI 8-Bit Companded PCM I/O on Timeslot 2 (Mode 2)
C4i
start of frame (stbus & GCI)
F0i (ST-BUS)
0
1
2
D
C
B
F0i (GCI)
PORT1
3
4
Rin
Sout
76 543210 76 54321076 543210
EC
76 543210 76 54321076 543210
PORT2
Sin
76 543210 76 54321076 543210
EC
Rout
76 543210 76 54321076 543210
outputs = High impedance
inputs = don’t care
indicates that an input channel is bypassed to an output channel
ST-BUS/GCI Mode 3 supports connection to 2B+D devices where timeslots 0 and 1 transport D and C channels and echo canceller
(EC) I/O channels are assigned to ST-BUS timeslot 2 (B). Both PORT1 and PORT2 must be configured in Mode 3.
Figure 5 - ST-BUS and GCI 8-Bit Companded PCM I/O with D and C channels (Mode 3)
7