PDSP16318_96 Datasheet, PDF (4/8 Pages) Mitel Networks Corporation – Complex Accumulator

PDSP16318/16318A
NOTE
This table shows the portion of the adder result passed to the D15:0 and C15:0 outputs. Where fewer than 16 adder bits are selected
the output data is padded with zeros.
ABSOLUTE MAXIMUM RATINGS (Note 1)
Supply voltage VCC
-0.5V to 7.0V
Input voltage VIN
-0.9V to VCC +0.9V
Output voltage VOUT
-0.9V to VCC +0.9V
Clamp diode current per pin Ik (see Note 2)
18mA
Static discharge voltage (HMB) VSTAT
500V
Storage temperature range TS
-65°C to +150°C
Ambient temperature with
power applied Tamb
Industrial
-40°C to +85°C
Military
-55°C to +125°C
Junction temperature
150°C
Package power dissipation PTOT
1000mW
THERMAL CHARACTERISTICS
Package Type
LC
AC
θJC °C/W
12
12
NOTES
1. Exceeding these ratings may cause permanent damage.
Functional operation under these conditions is not implied.
2. Maximum dissipation or 1 second should not be exceeded, only
one output to be tested at any one time.
3. Exposure to absolute maximum ratings for extended periods may
affect device reliability.
θJA °C/W
35
36
4