|
VP310 Datasheet, PDF (1/31 Pages) Mitel Networks Corporation – Satellite Channel Decoder | |||
|
VP310
Satellite Channel Decoder
Preliminary Information
SHORTFORM TECHNICAL MANUAL
VP310 - Key Features
DS5155 -1.00 21/04/99
Ordering Information
VP310 CG GQ1R
⢠Conforms to EBU specification for DVB-S and DirecTV specification for DSS.
⢠On-chip digital filtering supports 1 to 45MBaud Symbol rates.
⢠On-chip 6-bit 60 or 90MHz dual-ADC.
⢠High speed scanning mode for blind symbol rate and code rate acquisition.
⢠Up to ± 15MHz LNB frequency tracking.
⢠Fully digital timing and phase recovery loops.
⢠High level software interface for minimum development time.
⢠DiSEqC⢠v1.1: control outputs for full control of LNB and dish.
Applications
⢠DVB 1 to 45MBaud compliant satellite receivers.
⢠DSS 20MBaud compliant satellite receivers.
⢠SCPC receivers. (Single Channel Per Carrier)
⢠SMATV trans-modulators. (Single Master Antenna TV)
⢠LMDS. (Local Multipoint Distribution Service)
⢠Satellite PC applications.
The VP310 is a QPSK/BPSK 1 to 45MBaud demodulator and channel decoder for
digital satellite television transmissions to the European Broadcast Union ETS 300 421
specification. It receives analog I and Q signals from the tuner, digitises and digitally
demodulates this signal, and implements the complete DVB/DSS FEC (Forward Error
Correction), and de-scrambling function. The output is in the form of MPEG2 or DSS
transport stream data packets. The VP310 also provides automatic gain control to the
RF front-end devices.
The VP310 has a serial I²C port interface to the control microprocessor. Minimal
software is required to control the VP310 because of the built in automatic search and
decode control functions.
|
▷ |