JAN2N6768 Datasheet, PDF (4/5 Pages) Microsemi Corporation – N-CHANNEL MOSFET

6 Lake Street, Lawrence, MA 01841
1-800-446-1158 / [phone] / Fax: [phone]
Website: http://www.microsemi.com
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland
Tel: [phone] Fax: [phone]
PACKAGE DIMENSIONS
Ltr
CD
CH
HR
HR₁
HT
LD
LL
L₁
MHD
MHS
PS
PS₁
S
Dimensions
Inches
Millimeters
Min
Max
Min Max
.875
22.23
.250
.360
6.35 9.15
.495
.525 12.57 13.3
.131
.188
3.33 4.78
.060
.135
1.52 3.43
.057
.063
1.45 1.60
.038
.043
0.97 1.10
.312
.500
7.92 12.70
.050
1.27
.151
.161
3.84 4.09
1.177 1.197 29.90 30.40
.420
.440 10.67 11.18
.205
.225
5.21 5.72
.655
.675 16.64 17.15
Notes
5
6
3
7
NOTES:
1. Dimensions are in inches.
2. Millimeters are given for general information only.
3. These dimensions shall be measured at points .050 inch (1.27 mm) and .055 inch (1.40 mm) below the seating plane. When
gauge is not used, measurement will be made at the seating plane.
4. The seating plane of the header shall be flat within .001 inch (0.03 mm) concave to .004 inch (0.10 mm) convex inside a
.930 inch (23.62 mm) diameter circle on the center of the header and flat within .001 inch (0.03 mm) concave to .006 inch
(0.15 mm) convex overall.
5. These dimensions pertain to the 2N6764 and 2N6766 types.
6. These dimensions pertain to the 2N6768 and 2N6770 types.
7. Mounting holes shall be deburred on the seating plane side.
8. Drain is electrically connected to the case.
9. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology.
FIGURE 1. Physical dimensions of transistor types 2N6764 and 2N6766 TO-204AE;
for types 2N6768 and 2N6770, TO-204AA
T4-LDS-0043 Rev. 2 (101484)
Page 4 of 5