DRF1300_0912 Datasheet, PDF (4/4 Pages) Microsemi Corporation – MOSFET Push-Pull Hybrid

Pin Assignments
Pin 1
Ground
Pin 2 U1 +Vdd
Pin 3
U1 FN
Pin 4
U1 IN
Pin 5
U1 SG
Pin 6 U1 +Vdd
Pin 7
Ground
Pin 8 U2 +Vdd
Pin 9
U2 FN
Pin 10
U2 IN
Pin 11
U2 SG
Pin 12 U2 +Vdd
Pin 13
Ground
Pin 14
Source
Pin 15 U2 Drain
Pin 16
Source
Pin 17 U1 Drain
Pin 18
Source
DRF1300
None of the inputs to U1 or U2 of the DRF1300 are isolated for direct connection to a ground referenced power
supply or control circuitry. Isolation appropriate to the application is the responsibility of the end user. It
is imperative that high output currents be restricted to the Source (14, 16, 18) and Drain (15, 17) pins by design.
See DRF100 for more information on Driver IC used in the device.
The Function (FN, pin 3 or pin 9) is the invert or non-invert select Pin, it is Internally held high.
Truth Table * Referenced to SG
FN (pin 3)
IN (pin 4)
MOSFET
HIGH
HIGH
ON
HIGH
LOW
OFF
LOW
HIGH
OFF
LOW
LOW
ON
Truth Table * Referenced to SG
FN (pin 9)
IN (pin 10)
MOSFET
HIGH
HIGH
ON
HIGH
LOW
OFF
LOW
HIGH
OFF
LOW
LOW
ON
All dimensions are ± .005
Figure 4, DRF1300 Mechanical Outline