DRF1300_0912 Datasheet, PDF (1/4 Pages) Microsemi Corporation – MOSFET Push-Pull Hybrid

DRF1300
MOSFET Push-Pull Hybrid
D
The DRF1300 is a push-pull hybrid containing two high power gate ^IN
drivers and two power MOSFETs. It was designed to provide the sys-
S
tem designer increased flexibility, higher performance, and lowered cost
D
over a non-integrated solution. This low parasitic approach, coupled
with the Schmitt trigger input, Kelvin signal ground, Anti-Ring function ^IN
Invert and Non-invert select pin provide improved stability and control in
DRIVER _30A
S
MOSFETS
Kilowatt to Multi-Kilowatt, High Frequency ISM applications.
500V, 30A, 30MHz
FEATURES
• Switching Frequency: DC TO 30MHz
• Inverting Non-Inverting Select
• Low Pulse Width Distortion
• Single Power Supply (Per Section)
• 1V CMOS Schmitt Trigger Input 1V
Hysteresis
• Switching Speed 3-4ns
• B_Vds = 500V
• I_ds = 30A max. Per-section
• R_ds(on) ≤ .24 Ohm
• P_D = 550W Per-section
• RoHS Compliant
TYPICAL APPLICATIONS
• Class C, D and E RF Generators
• Switch Mode Power Amplifiers
• HV Pulse Generators
• Ultrasound Transducer Drivers
• Acoustic Optical Modulators
Driver Absolute Maximum Ratings
Symbol
V_DD
IN, FN
I_{O PK}
T_JMAX
Parameter
Supply Voltage
Input Single Voltages
Output Current Peak
Operating Temperature
Driver Specifications
Symbol
V_DD
IN
Parameter
Supply Voltage
Input Voltage
IN_(R)
IN_(F)
I_DDQ
I_O
C_iss
R_IN
V_T(ON)
V_T(OFF)
T_DLY
t_r
t_f
Input Voltage Rising Edge
Input Voltage Falling Edge
Quiescent Current
Output Current
Input Capacitance
Input Parallel Resistance
Input, Low to High Out (See Truth Table)
Input, High to Low Out (See Truth Table)
Time Delay (throughput)
Rise Time
Fall Time
Ratings
Unit
15
V
-.7 to +5.5
8
A
175
°C
Min
Typ
Max Unit
10
15
V
3
5
3
ns
3
2
mA
8
A
3
1
MΩ
0.8
1.1
V
1.9
2.2
38
ns
5
ns
5
Microsemi Website - http://www.microsemi.com