HAL1821UA-A Datasheet, PDF (8/14 Pages) Micronas – Linear Hall-Effect Sensor Family in SOT89B Package

HAL 1821...HAL 1823
DATA SHEET
3.2. Dimensions of Sensitive Area
0.2 mm x 0.1 mm
3.3. Position of Sensitive Areas
SOT89B-1
y 0.95 mm nominal
A4 0.4 mm nominal
D1 2.55 0.05 mm
3.4. Absolute Maximum Ratings
Stresses beyond those listed in the “Absolute Maximum Ratings” may cause permanent damage to the device. This
is a stress rating only. Functional operation of the device at these conditions is not implied. Exposure to absolute
maximum rating conditions for extended periods will affect device reliability.
This device contains circuitry to protect the inputs and outputs against damage due to high static voltages or electric
fields; however, it is advised that normal precautions be taken to avoid application of any voltage higher than abso-
lute maximum-rated voltages to this circuit.
All voltages listed are referenced to ground (GND).
Symbol
V_SUP
Parameter
Supply Voltage
V_OUT
Output Voltage
Pin No.
1
Min.
8.5
14.4
15
Max. Unit
8.5 V
14.4
16
3
0.5¹⁾ 8.5
V
0.5¹⁾ 14.4
0.5¹⁾ 16
V_OUTV_SUP Excess of Output Voltage
1,3

over Supply Voltage
0.5 V
I_OUT
Continuous Output Current 3
5
5
mA
t_Sh
Output Short Circuit Duration 3

10
min
T_J
Junction Temperature under
Bias
40
190 °C
V_ESD
ESD Protection³⁾
1,2,3
4.0
4.0 kV
1) _{internal protection resistor = 50 }
2) _{for 96h - Please contact Micronas for other temperature requirements}
3) _{100 pF and 1.5 k}
Condition
t < 96 h, not additive
t < 10 min.
t < 1 min.
not additive
t < 96 h
t < 10 min.
t < 1 min.
not additive
2)
8
Aug. 2, 2013; DSH000162_001EN
Micronas