N25Q128A11E1240X Datasheet, PDF (80/83 Pages) Micron Technology – Micron Serial NOR Flash Memory

128Mb, Multiple I/O Serial Flash Memory
Part Number Ordering Information
Part Number Ordering Information
A list of all active Serial NOR part numbers is available on Micron's Serial NOR Flash
part catalog page. For further information on line items not listed here or on any aspect
of this device, contact your nearest representative.
Table 40: Part Number Information
Part Number
Category
Device type
Density
Technology
Feature set
Operating voltage
Block structure
Package
(RoHS-compliant)
Temperature and
test flow
Security features
Shipping material
Category Details
N25Q = Serial NOR Flash memory, Multiple Input/Output (Single, Dual, Quad I/O), XIP
128 = 128Mb
A = 65nm
1 = Byte addressability; HOLD pin; Micron XIP
2 = Byte addressability; HOLD pin; Basic XIP
3 = Byte addressability; RST# pin; Micron XIP
4 = Byte addressability; RST# pin; Basic XIP
1 = V_CC = 1.7 to 2.0V
E = Uniform (64KB and 4KB)
F7 = V-PDFN-8 6mm x 5mm Sawn (MLP8 6mm x 5mm)
F8 = V-PDFN-8 8mm x 6mm (MLP8 8mm x 6mm)
12 = T-PBGA-24b05 6mm x 8mm
SF = SOP2-16 300 mils body width (SO16W)
SE = SOP2-8 208 mils body width (SO8W)
4 = IT: –40°C to +85°C; Device tested with standard test flow
A = Automotive temperature range: –40 to +125°C; Device tested with high reliability cer-
tified test flow
H = IT: –40°C to +85°C; Device tested with high reliability certified test flow
0 = Default
E = Tray
F = Tape and reel
G = Tube
Note: 1. Additional secure options are available upon customer request.
Notes
1
Table 41: Package Details
Micron SPI
and JEDEC
Category
V-PDFN-8
6mm x 5mm
Sawn
V-PDFN-8
8mm x 6mm
Shortened
Package
Name
DFN/6mm x
5mm
Sawn
DFN/8mm x
6mm
Package Description
Very thin, plastic small-out-
line, 8 terminal pads (no
leads), 6mm x 5mm Sawn
Very thin, plastic small out-
line, 8 terminal pads (no
leads), 8mm x 6mm
M25P
M45PE
Symbol
MS
ME
N25Q
Symbol
F7
F8
M25P
M45PE Pack-
age Names
MLP8, DFN8,
VDFPN8,
VFQFPN8
MLP8, VDFPN8
Alternate
Package Name
V-PSON1-8/6mm
x 5mm Sawn,
VSON
V-PSON1-8/8mm
x 6mm, VSON
PDF: 09005aef845665f6
n25q_128mb_1_8v_65nm.pdf - Rev. K 06/2012 EN
80
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2012 Micron Technology, Inc. All rights reserved.