MT9D011 Datasheet, PDF (1/61 Pages) Micron Technology – 1/3-INCH 2-MEGAPIXEL CMOS ACTIVE-PIXEL DIGITAL IMAGE SENSOR

PRELIMINARY^‡
MT9D011
2-MEGAPIXEL DIGITAL IMAGE SENSOR
1/3-INCH 2-MEGAPIXEL
CMOS ACTIVE-PIXEL
DIGITAL IMAGE SENSOR
PART NUMBERS: MT9D011W00STC
MT9D011D00STC
Features
• DigitalClarity^™ CMOS Imaging Technology
• High frame rate
• Superior low-light performance
• Low dark current
• Simple two-wire serial interface
• Auto black level calibration
• Support for long integration times
• 2 x 2 binning
• Anti-aliasing function
• Anti-eclipse function
• Operating modes: snapshot and flash control, high
frame rate preview, electronic panning
• Programmable controls: gain, frame size/rate,
exposure, left-right and top-bottom image reversal,
window size, panning, zoom and decimation
• 10-bit analog-to-digital converter (ADC) with three
external inputs
• Support for external mechanical shutter
• Internal master clock generated from on-chip phase
locked loop (PLL)
• Electronic rolling shutter (ERS)
Applications
• Cellular phones
• PC cameras
• PDAs
• Toys and other battery-powered products
Table 1: Key Performance Parameters
PARAMETER
TYPICAL VALUE
Optical Format
1/3-inch (4:3)
Active Imager Size
4.48mm(H) x 3.36mm(V),
5.60mm Diagonal
Active Pixels
1600H x 1200V
Pixel Size
2.8µm x 2.8µm
Color Filter Array
RGB Bayer Pattern
Shutter Type
Electronic Rolling Shutter
(ERS)
Maximum Data Rate/
Master Clock
40 MPS/40 MHz
Frame UXGA (full frame, 15 fps at 36 MHz
Rate 1600H x 1200V)
SVGA (preview, 30 fps at 36 MHz
800H x 600V)
ADC Resolution
10-bit, on-chip
Responsivity
1.0 V/lux-sec (550nm)
Dynamic Range
68dB
SNR_MAX
42dB
Supply I/O Digital
Voltage _{Core Digital}
1.7V–3.6V
1.7V–1.9V (1.8V nominal)
Analog
2.5V–3.1V (2.8V nominal)
Power Consumption
75mW at 30 fps,
36 MHz, Preview mode
125mW at 15 fps, (VAA,
VAAPIX and VDD only)
36 MHz, Full frame mode
Operating Temperature ^{-30°C to +70°C}
Packaging
Wafer or die
09005aef81516da4
MT9D011__MI2010_E_1.fm - Rev. A 11/04 EN
1
©2004 Micron Technology, Inc. All rights reserved.
‡_{PRODUCTS AND SPECIFICATIONS DISCUSSED HEREIN ARE FOR EVALUATION AND REFERENCE PURPOSES ONLY AND ARE SUBJECT TO CHANGE BY}
MICRON WITHOUT NOTICE. PRODUCTS ARE ONLY WARRANTED BY MICRON TO MEET MICRON’S PRODUCTION DATA SHEET SPECIFICATIONS.