PIC16F716-I Datasheet, PDF (95/136 Pages) Microchip Technology – 8-bit Flash-based Microcontroller with A/D Converter and Enhanced Capture/Compare/PWM

PIC16F716
12.1 DC Characteristics: PIC16F716 (Industrial, Extended)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
-40°C ≤ TA ≤ +125°C for extended
Param
No.
Sym
Characteristic
Min Typ† Max Units
Conditions
VDD Supply Voltage
D001
D001A
2.0 — 5.5 V Industrial
3.0 — 5.5 V Extended
D002* VDR RAM Data Retention
Voltage⁽¹⁾
— 1.5* — V
D003
VPOR VDD Start Voltage to ensure
—
internal Power-on Reset signal
Vss —
V See section on Power-on Reset for
details
D004* SVDD VDD Rise Rate to ensure
0.05 —
internal Power-on Reset signal
— V/ms PWRT enabled (PWRTE bit clear)
D005 VBOR Brown-out Reset voltage trip
point
3.65 4.0 4.35 V BOREN bit set, BOR bit = ‘1’
2.2 2.5 2.7 V BOREN bit set, BOR bit = ‘0’
*
†
Note 1:
These parameters are characterized but not tested.
Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
This is the limit to which VDD can be lowered without losing RAM data.
© 2007 Microchip Technology Inc.
DS41206B-page 93