TC1411NEOA713 Datasheet, PDF (7/18 Pages) Microchip Technology – 1A High-Speed MOSFET Drivers

TC1411/TC1411N
3.0 PIN DESCRIPTIONS
The descriptions of the pins are listed in Table 3-1.
TABLE 3-1: PIN FUNCTION TABLE
Pin
No.
Symbol
Description
1
V_DD
Supply input, 4.5V to 16V
2
INPUT
Control input
3
NC
No connection
4
GND
Ground
5
GND
Ground
6
OUTPUT CMOS push-pull output, common to pin 7
7
OUTPUT CMOS push-pull output, common to pin 6
8
V_DD
Supply input, 4.5V to 16V
3.1 Supply Input (V_DD)
The V_DD input is the bias supply for the MOSFET driver
and is rated for 4.5V to 16V with respect to the ground
pin. The V_DD input should be bypassed to ground with
a local ceramic capacitor. The value of the capacitor
should be chosen based on the capacitive load that is
being driven. A value of 1.0 µF is suggested.
3.2 Control Input (INPUT)
The MOSFET driver input is a high-impedance,
TTL/CMOS-compatible input. The input has 300 mV of
hysteresis between the high and low thresholds that
prevents output glitching even when the rise and fall
time of the input signal is very slow.
3.3 CMOS Push-pull Output (OUTPUT)
The MOSFET driver output is a low impedance, CMOS
push-pull style output, capable of driving a capacitive
load with 1A peak currents.
3.4 Ground (GND)
The ground pins are the return path for the bias current
and for the high peak currents which discharge the load
capacitor. The ground pins should be tied into a ground
plane or have very short traces to the bias supply
source return.
3.5 No Connect (NC)
No internal connection.
© 2006 Microchip Technology Inc.
DS21390D-page 7