PIC18F67J50-I Datasheet, PDF (7/16 Pages) Microchip Technology – PIC18F87J50 Family Silicon Errata and Data Sheet Clarification

PIC18F87J50 FAMILY
4. Module: Section 28.3 “DC
Characteristics: PIC18F87J50
family (Industrial)”
On page 428, the characteristics and conditions of the
Input Leakage Current are updated for the Analog
(D060) and included for the Digital (D060A) I/O ports.
The changed content is indicated in bold text in the “DC
CHARACTERISTICS” table.
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
Param
No.
Symbol
Characteristic
Min
Max Units
Conditions
VIL
D030
D030A
D031
Input Low Voltage
All I/O ports:
with TTL buffer
with Schmitt Trigger buffer
VSS
0.15 VDD V VDD < 3.3V
—
0.8
V 3.3V ≤ VDD ≤ 3.6V
VSS
0.2 VDD V
D032
D033
D033A
MCLR
OSC1
OSC1
VSS
0.2 VDD V
VSS
0.3 VDD V HS, HSPLL modes
VSS
0.2 VDD V EC, ECPLL modes
D034
VIH
D040
D040A
D041
Dxxx
DxxxA
Dxxx
T1CKI
VSS
0.3
Input High Voltage
I/O ports with non 5.5V
tolerance:⁽²⁾
with TTL buffer
0.25 VDD + 0.8V VDD
2.0
VDD
with Schmitt Trigger buffer
0.8 VDD
VDD
I/O ports with 5.5V
tolerance:⁽²⁾
with TTL buffer
0.25 VDD + 0.8V 5.5
2.0
5.5
with Schmitt Trigger buffer
0.8 VDD
5.5
V
V VDD < 3.3V
V 3.3V ≤ VDD ≤ 3.6V
V
V VDD < 3.3V
V 3.3V ≤ VDD ≤ 3.6V
V
D042
D043
D043A
MCLR
OSC1
OSC1
0.8 VDD
0.7 VDD
0.8 VDD
VDD
V
VDD
V HS, HSPLL modes
VDD
V EC, ECPLL modes
D044
IIL
D060
D060A
T1CKI
Input Leakage Current⁽¹⁾
I/O ports with non 5.5V
tolerance:⁽²⁾
I/O ports with 5.5V
tolerance:⁽²⁾
1.6
VDD
V
—
±1
μA VSS ≤ VPIN ≤ VDD,
Pin at high-impedance
—
±1
μA VSS ≤ VPIN ≤ 5.5V,
Pin at high-impedance
D061
D063
Note 1:
2:
MCLR
—
±1
μA
OSC1
—
±5
μA
Negative current is defined as current sourced by the pin.
Refer to Table 10-1 for the pins that have corresponding tolerance limits.
Vss ≤ VPIN ≤ VDD
Vss ≤ VPIN ≤ VDD
© 2009 Microchip Technology Inc.
DS80481A-page 7