DSPIC33FJ06GS101A-I Datasheet, PDF (292/352 Pages) Microchip Technology – 16-Bit Microcontrollers and Digital Signal Controllers with High-Speed PWM, ADC and Comparators

dsPIC33FJ06GS001/101A/102A/202A and dsPIC33FJ09GS302
FIGURE 25-9:
HIGH-SPEED PWM MODULE FAULT TIMING CHARACTERISTICS
FLTx
PWMx
MP30
MP20
FIGURE 25-10:
HIGH-SPEED PWM MODULE TIMING CHARACTERISTICS
MP11 MP10
PWMx
Note: Refer to Figure 25-1 for load conditions.
TABLE 25-28: HIGH-SPEED PWM MODULE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Param. Symbol
Characteristic⁽¹⁾
Min. Typ. Max. Units
Conditions
MP10 TFPWM PWM Output Fall Time
—
2.5
—
ns
MP11 TRPWM PWM Output Rise Time
—
2.5
—
ns
MP20 ^TFD
Fault Input  to PWM
I/O Change
—
—
15
ns
MP30 ^TFH
Minimum PWM Fault Pulse
8
Width
—
—
ns DTC<10> = 10
MP31 TPDLY Tap Delay
1.04
—
—
ns ACLK = 120 MHz
MP32 ACLK
PWM Input Clock
—
—
120 MHz See Note 2, Note 3
Note 1: These parameters are characterized but not tested in manufacturing.
2: This parameter is a maximum allowed input clock for the PWM module.
3: The maximum value for this parameter applies to dsPIC33FJ06GS101A/102A/202A/302 devices only.
DS75018C-page 292
 2011-2012 Microchip Technology Inc.