PIC16F722 Datasheet, PDF (214/302 Pages) Microchip Technology – 28/40/44-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC16F72X/PIC16LF72X
23.2 DC Characteristics: PIC16F72X/PIC16LF72X-I/E (Industrial, Extended)
PIC16LF72X
PIC16F72X
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
-40°C ≤ TA ≤ +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
-40°C ≤ TA ≤ +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
VDD
Conditions
Note
Supply Current (IDD)^{(1, 2)}
D009 ^{LDO Regulator}
—
350
—
μA
— HS, EC OR INTOSC/INTOSCIO (8-16 MHZ)
Clock modes with all VCAP pins disabled
—
50
—
μA
— All VCAP pins disabled
—
30
—
μA
— VCAP enabled on RA0, RA5 or RA6
—
5
—
μA
— LP Clock mode and Sleep (requires FVR and
BOR to be disabled)
D010
—
7.0
12
μA
1.8 FOSC = 32 kHz
—
9.0
14
μA
3.0 ^{LP Oscillator mode (Note 4),}
-40°C ≤ TA ≤ +85°C
D010
D011
D011
D011
D011
D012
D012
D013
D013
Note 1:
2:
3:
4:
5:
—
11
20
μA
1.8 FOSC = 32 kHz
—
14
22
μA
3.0 ^{LP Oscillator mode (Note 4),}
-40°C ≤ TA ≤ +85°C
—
15
24
μA
5.0
—
7.0
12
μA
1.8 _{FOSC = 32 kHz}
—
9.0
18
μA
3.0 ^{LP Oscillator mode}
-40°C ≤ TA ≤ +125°C
—
11
21
μA
1.8 FOSC = 32 kHz
—
14
25
μA
3.0 ^{LP Oscillator mode (Note 4)}
—
15
27
μA
5.0 ^{-40°C ≤ TA ≤ +125°C}
—
110
150
μA
—
150
215
μA
1.8 FOSC = 1 MHz
3.0 ^{XT Oscillator mode}
—
120
175
μA
—
180
250
μA
1.8 FOSC = 1 MHz
3.0 ^{XT Oscillator mode (Note 5)}
—
240
300
μA
5.0
—
230
300
μA
—
400
600
μA
1.8 FOSC = 4 MHz
3.0 ^{XT Oscillator mode}
—
250
350
μA
—
420
650
μA
1.8 FOSC = 4 MHz
3.0 ^{XT Oscillator mode (Note 5)}
—
500
750
μA
5.0
—
125
180
μA
—
230
270
μA
1.8 FOSC = 1 MHz
3.0 ^{EC Oscillator mode}
—
150
205
μA
—
225
320
μA
1.8 FOSC = 1 MHz
3.0 ^{EC Oscillator mode (Note 5)}
—
250
410
μA
5.0
The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula IR = VDD/2REXT (mA) with REXT in kΩ.
FVR and BOR are disabled.
0.1 μF capacitor on VCAP (RA0).
DS41341E-page 214
© 2009 Microchip Technology Inc.