English
Language : 

24LC08B Datasheet, PDF (2/12 Pages) Microchip Technology – 8K/16K I 2 C ™ Serial EEPROMs in ISO Micromodules
24LC08B/16B MODULES
1.0 ELECTRICAL CHARACTERISTICS
1.1 Maximum Ratings*
VCC...................................................................................7.0V
All inputs and outputs w.r.t. VSS ................-0.6V to VCC +1.0V
Storage temperature ..................................... -65˚C to +150˚C
Ambient temp. with power applied................. -65˚C to +125˚C
Soldering temperature of leads (10 seconds) ............. +300˚C
ESD protection on all pins ..................................................≥ 4 kV
*Notice: Stresses above those listed under “Maximum ratings”
may cause permanent damage to the device. This is a stress rat-
ing only and functional operation of the device at those or any
other conditions above those indicated in the operational listings
of this specification is not implied. Exposure to maximum rating
conditions for extended periods may affect device reliability.
TABLE 1-1:
Name
VSS
SDA
SCL
VCC
PIN FUNCTION TABLE
Function
Ground
Serial Data
Serial Clock
+2.5V to 5.5V Power Supply
TABLE 1-2 DC CHARACTERISTICS
All Parameters apply across the speci- Commercial (C): Tamb = 0˚C to +70˚C, VCC = 2.5V to 5.5V
fied operating ranges unless otherwise
noted.
Parameter
Symbol
Min.
Max. Units
Conditions
SCL and SDA pins:
High level input voltage
Low level input voltage
Hysteresis of Schmitt trigger inputs
Low level output voltage
VIH
VIL
VHYS
VOL
0.7 VCC
0.05 VCC
0.3 VCC
—
0.40
Input leakage current
ILI
-10
10
Output leakage current
ILO
-10
10
Pin capacitance (all inputs/outputs)
CIN,
—
10
COUT
Operating current
ICC Write
—
3
ICC Read
—
1
Standby current
ICCS
—
100
Note: This parameter is periodically sampled and not 100% tested.
V (Note)
V (Note)
V Vcc ≥ 2.5V (Note)
V IOL = 3.0 mA, VCC = 4.5V
IOL = 2.1 mA, VCC = 2.5V
µA VIN = VCC or VSS
µA VOUT = VCC or VSS
pF VCC = 5.0V (Note)
Tamb = 25˚C, f = 1 MHz
mA VCC = 5.5V, SCL = 400 kHz
mA VCC = 5.5V, SCL = 400 kHz
µA VCC = 5.5V, SDA = SCL = VCC
DS21224A-page 2
© 1997 Microchip Technology Inc.