PL613-01 Datasheet, PDF (10/20 Pages) Microchip Technology – 1.8V to 3.3V, PicoPLL, 3-PLL, 200 MHz, 8 Output Clock IC

PL613-01
target clock inputs as transmission lines (microstrip or
stripline) for the best signal integrity and the lowest
EMI.
When using ferrite beads instead of Rp1, Rp2, or Rp3,
make sure the resonance frequency of the bead with
the decoupling capacitors is below 50 kHz so as not to
interfere with the PLL loop bandwidth. This requirement
is difficult to fulfill, so it is recommended to use the
resistors Rp1, Rp2, and Rp3 for power supply filtering.
DS20005650A-page 10
 2016 Microchip Technology Inc.