English
Language : 

MCP40D17 Datasheet, PDF (1/66 Pages) Microchip Technology – 7-Bit Single I2C™ (with Command Code) Digital POT with Volatile Memory in SC70
MCP40D17/18/19
7-Bit Single I2C™ (with Command Code) Digital POT
with Volatile Memory in SC70
Features
• Potentiometer or Rheostat configuration options
• 7-bit: Resistor Network Resolution
- 127 Resistors (128 Steps)
• Zero Scale to Full Scale Wiper operation
• RAB Resistances: 5 kΩ, 10 kΩ, 50 kΩ, or 100 kΩ
• Low Wiper Resistance: 100Ω (typical)
• Low Tempco:
- Absolute (Rheostat): 50 ppm typical
(0°C to 70°C)
- Ratiometric (Potentiometer): 15 ppm typical
• I2C Protocol
- Supports SMBus 2.0 Write Byte/Word
Protocol Formats
- Supports SMBus 2.0 Read Byte/Word
Protocol Formats
• Standard I2C Device Addresses:
- All devices offered with address “0101110”
- MCP40D18 also offered with address
“0111110”
• Brown-out reset protection (1.5V typical)
• Power-on Default Wiper Setting (Mid-scale)
• Low-Power Operation:
- 2.5 µA Static Current (typical)
• Wide Operating Voltage Range:
- 2.7V to 5.5V - Device Characteristics
Specified
- 1.8V to 5.5V - Device Operation
• Wide Bandwidth (-3 dB) Operation:
- 2 MHz (typical) for 5.0 kΩ device
• Extended temperature range (-40°C to +125°C)
• Very small package (SC70)
• Lead free (Pb-free) package
Package Types
Potentiometer
MCP40D18
SC70-6
VDD 1
A
6A
VSS 2
B
SCL 3
5W
W
4 SDA
Rheostat
MCP40D17
SC70-6
VDD 1
VSS 2 A
SCL 3
W6W
B5 B
4 SDA
MCP40D19
SC70-5
VDD 1
W
VSS 2
B
SCL 3
5W
A
4 SDA
Applications
• PC Servers (I2C Protocol with Command Code)
• Amplifier Gain Control and Offset Adjustment
• Sensor Calibration (Pressure, Temperature,
Position, Optical and Chemical)
• Set point or offset trimming
• Cost-sensitive mechanical trim pot replacement
• RF Amplifier Biasing
• LCD Brightnes and Contract Adjustment
Device Features
Resistance (typical)
Device
Wiper
Configuration
Options (kΩ)
MCP40D17
MCP40D18
MCP40D19
I2C 128 Rheostat
RAM
I2C 128 Potentiometer RAM
I2C 128 Rheostat
RAM
5.0, 10.0, 50.0, 100.0
5.0, 10.0, 50.0, 100.0
5.0, 10.0, 50.0, 100.0
Note 1: Analog characteristics only tested from 2.7V to 5.5V
Wiper
(Ω)
75
75
75
VDD
Operating
Range ( 1)
1.8V to 5.5V
1.8V to 5.5V
1.8V to 5.5V
Package
SC70-6
SC70-6
SC70-5
© 2009 Microchip Technology Inc.
DS22152B-page 1