41228F Datasheet, PDF (1/22 Pages) –

PIC10F200/202/204/206
Memory Programming Specification
This document includes the
programming specifications for the
following devices:
• PIC10F200
• PIC10F202
• PIC10F204
• PIC10F206
1.0 PROGRAMMING THE
PIC10F200/202/204/206
The PIC10F200/202/204/206 is programmed using a
serial method. The Serial mode will allow the
PIC10F200/202/204/206 to be programmed while in
the user’s system. This allows for increased design
flexibility. This programming specification applies to
PIC10F200/202/204/206 devices in all packages.
Pin Diagrams
SOT-23
GP0
VSS
1
6
2
5
GP1
3
4
GP3/MCLR/VPP
VDD
GP2/T0CKI/FOSC4
1.1 Hardware Requirements
The PIC10F200/202/204/206 requires one power
supply for VDD (5.0V) and one for VPP (12V).
1.2 Program/Verify Mode
The Program/Verify mode for the PIC10F200/202/204/
206 allows programming of user program memory for
user ID locations, backup OSCCAL location and the
Configuration Word.
SOT-23
GP0/CIN+
VSS
GP1/CIN-
1
6
2
5
3
4
GP3/MCLR/VPP
VDD
GP2/T0CKI/COUT/FOSC4
PDIP
N/C
1
VDD
2
GP2/T0CKI/FOSC4
3
GP1
4
PDIP
8
GP3/MCLR/VPP
N/C
1
7
VSS
VDD
2
6
N/C
GP2/T0CKI/COUT/FOSC4
3
5
GP0
GP1/CIN-
4
8
GP3/MCLR/VPP
7
VSS
6
N/C
5
GP0/CIN+
TABLE 1-1: PIN DESCRIPTIONS (DURING PROGRAMMING): PIC10F200/202/204/206
Pin Name
Function
During Programming
Pin Type
Pin Description
GP1
ICSPCLK
GP0
ICSPDAT
MCLR/VPP
Program/Verify mode
VDD
VDD
VSS
VSS
Legend: I = Input, O = Output, P = Power
I
Clock input – Schmitt Trigger input
I/O
Data input/output – Schmitt Trigger input
P
Programming Power
P
Power Supply
P
Ground
 2007-2011 Microchip Technology Inc.
Advance Information
DS41228F-page 1