TH8055 Datasheet, PDF (8/15 Pages) Micro Electronics – Single Wire CAN Transceiver

TH8055
Single Wire CAN Transceiver
Parameter
High level input voltage
Low level input voltage
TxD pull up current
MODE0 and 1 pull down current
Low level output voltage
High level output leakage
RxD output current
Thermal shutdown ^[3]
Thermal recovery ^[3]
Symbol
Condition
PIN TXD,MODE0,MODE1
VIH
VIL
IIL_TXD TxD=L, MODE0 and 1=H
IIH_MODE0 MODE0 and 1=H
PIN RXD
VOLRxD
IIHRxD
IRxD
IRxD = 2mA
VRxD=5V
VRxD=5V
Overtemperature protection
TSD
TREC
[1] _{Leakage current in case of Loss of ground is the summary of both currents ILKN_CAN and ILKN_RTH .}
[2] _{Wake up is detected at the minimum of VihWuFix or VihWuOffset.}
[3] _{thresholds not tested in production, guaranteed by design, only switch on/off tested}
Min
Typ
Max Unit
3.4
V
1.6
V
20
50
µA
15
50
µA
0.4
V
-10
10
µA
70 mA
155
180 °C
130
150 °C
390108055
Rev. 1.1a
Page 8 of 15
Jan 2002