PL123-05NSC Datasheet, PDF (8/8 Pages) Micrel Semiconductor – Low Skew Fanout Buffer

ORDERING INFORMATION
PL123-05N/-09N
Low Skew Fanout Buffer
For part ordering, please contact our Sales Department:
2180 Fortune Drive, San Jose, CA 95131, USA
Tel: [phone] Fax: [phone]
PART NUMBER
The order number for this device is a combination of the following:
Part number, Package type and Operating temperature range
PL123-0xN X X - X
Part Number
None=Tubes
R=Tape & Reel
Package Type
S=SOP
Temperature Range
C=Commercial (0°C to 70°C)
I=Industrial (-40°C to 85°C)
Part/Order Number
Marking
Package Option
Green (Lead-Free) Package
PL123-09NSC
PL123-09NSC-R
PL123-09NSI
PL123-09NSI-R
PL123-05NSC
PL123-05NSC-R
PL123-05NSI
PL123-05NSI-R
*Note: LLLLL designates lot number
P12309N
SC
LLLLL
P12309N
SI
LLLLL
P12305N
SC
LLLLL
P12305N
SI
LLLLL
16-Pin SOP Tube
16-Pin SOP (Tape and Reel)
16-Pin SOP Tube
16-Pin SOP (Tape and Reel)
8-Pin SOP Tube
8-Pin SOP (Tape and Reel)
8-Pin SOP Tube
8-Pin SOP (Tape and Reel)
Micrel Inc., reserves the right to make changes in its products or specifications, or both at any time without notice. The in formation furnished by Micrel
is believed to be accurate and reliable. However, Micrel makes no guarantee or warranty concerning the accuracy of said information and shall not be
responsible for any loss or damage of whatever nature resulting from the use of, or reliance upon this product.
LIFE SUPPORT POLICY: Micrel’s products are not authorized for use as critical components in life support devices or systems without the express
written approval of the President of Micrel Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel [phone] • fax [phone] • www.micrel.com Rev 03/15/12 Page 8