PL123E-05SC Datasheet, PDF (7/10 Pages) Micrel Semiconductor – Low Skew Zero Delay Buffer

(P P reliminary) L123E-05
Low Skew Zero Delay Buffer
3.3V and 2.5V AC Electrical Specifications (continued)
Description
Parameter Test Conditions
3.3V, 66–100 MHz, <15 pF
Min Typ Max Unit
–
–
60
ps
3.3V, >100 MHz, <15 pF
–
–
35
ps
Period Jitter,
Peak^[8,9]
3.3V, >66 MHz, <30 pF, Standard Drive
–
T_PER
3.3V, >66 MHz, <30 pF, High Drive
–
2.5V, >66 MHz, <15 pF, Standard. Drive –
–
75
ps
–
70
ps
–
60
ps
2.5V, 66–100 MHz, <15 pF, High Drive
–
–
60
ps
2.5V, >100 MHz, <15 pF, High Drive
–
–
45
ps
Notes:
7. For the given maximum loading conditions. See C L in Operating Conditions Tab le.
8. Parameter is guaranteed by design and characterization. Not 100% tested in production.
9. Typical jitter is measured at 3.3V or 2.5V, 29°C, with all outputs driven into the maximum spec ified load.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel [phone] • fax [phone] • www.micrel.com Rev 12/13/11 Page 7