MIC2555_06 Datasheet, PDF (5/29 Pages) Micrel Semiconductor – USB – OTG Transceiver

Micrel, Inc.
Absolute Maximum Ratings⁽¹⁾
Power Supply Voltage:
V_{BAT, GPIO-} ................................................. -0.3V to +6.0V
V_{DD_LGC} ......................................... –0.3V to +6.0V and ≤ V_BAT
USB Bus Voltage
V_BUS ......................................................................–0.3V to +6.0V
V_{DD_LGC} .........................................–0.3V to +6.0V and ≤ V_BUS
Voltage On Any Other Pin............................ –0.3V to +4.5V
Current Into/Out of Any Pin .......................................±10mA
Junction Temperature ................................................ 150°C
Storage Temperature ................................. –65^°C to +150^°C
ESD Ratings:..............................................V_BUS, D+, D–, ID
Human Body Model .............................................. 15 kV
ESD Ratings:................................................... All other pins
Human Body Model ................................................ 2 kV
MIC2555
Operating Ratings⁽²⁾
Power Supply Voltage:
V_BUS.......................................................... 4.4V to 5.25V
V_BAT ............................................................ 3.0V to 4.5V
Operating Temperature................................ –40^°C to +85^°C
Package Thermal Resistance .................................. 49^°C/W
Electrical Characteristics⁽³⁾
Test condition is 25^°C unless otherwise specified. Bold indicates -40^°C + 85^°C,
V_BAT = 3.6V, V_{DD_LGC} = 3.6V, V_BUS = 5.0V, V_TRM = 1µF, C+ = 0.22µF, C++ = 220µF, C_VBUS = 10µF
Symbol
Parameter
Condition
Min
Typ
Power Supplies
V_BAT
System Supply Voltage
V_{DD_LGC}
Logic Supply Voltage
V_TRM
Termination Voltage (internal
supply voltage)
I_TRM ≤ 2.5mA, 3.0 < V_BAT < 3.6V
3.0
1.6
2.8
3.3
I_{BAT_PD}
System Supply Current
Power Down mode
13
I_{BAT_SUS}
System Supply Current
Suspend mode
140
I_{BAT_FS_I}
System Supply Current
Full Speed, Idle, D+ ≥ 2.8V, D- ≤ 0.3V, I_VBUS
= 0mA
2.8
I_{BAT_FS_HC}
System Supply Current
Full Speed Transmitting 12Mb/s,
C_LOAD ≤ 350pF on D+, D-, I_VBUS = 0mA
17
I_{BAT_FS_LC}
System Supply Current
Full Speed Transmitting 12Mb/s,
C_L = 50pF on D+,D-, I_VBUS = 0mA
2.5
I_{BAT_LS_HC}
System Supply Current
Low Speed Transmitting 1.5Mb/s,
C_L = 350pF on D+,D-, I_VBUS = 0mA
6.5
I_{VBUS_S}
Current drawn by System
from V_BUS
Suspend mode, OE_INT/ = 1
80
I_{VDD_LGC}
Current drawn by System for
core logic
OE_INT/ = 1
7
Charge Pump and V_BUS
V_{BUS_ OUT}
Voltage Output to V_BUS
I_VBUS
V_BUS Output Current
R_{VBUS_PU}
B device SRP Pull-up
Resistor on V_BUS
R_{VBUS_PD}
B device SRP Pull-down
Resistor on V_BUS
I_BUS = 10mA, V_BAT = 3.0V
4.4V ≤ V_BUS ≤ 5.25V
Pull-up voltage = V_TRM
Pull-down to GND
4.4
5.0
10
27
281 1300
675 2300
Max Units
4.5
V
V_BAT
V
3.6
V
20
µA
250
µA
5.0
mA
40
mA
6
mA
12
mA
100
µA
15
µA
5.25
V
mA
7500
Ω
7500
Ω
December 2006
5
M9999-121406