PL502-35 Datasheet, PDF (3/10 Pages) Micrel Semiconductor – 750kHz – 800MHz Low Phase Noise Multiplier VCXO

PL502-35/-37/-38/-39
750kHz – 800MHz Low Phase Noise Multiplier VCXO
Universal Low Phase Noise ICs
PIN DESCRIPTIONS PL502-37/-39 (see previous page for PL502-35/-38)
Name
TSSOP
Pin number
3x3mm QFN
Pin number
Type
Description
XIN
XOUT
OE
VCON
GND
CLKT
CLKC
SEL0
SEL1
SEL2
SEL3
VDD
2
3
6
7
8,9,10,14
11
13
16
15
5
4
1, 12
12
13
16
1
2,3,4,8
5
7
10
9
15
14
6,11
I Crystal input. See Crystal Specification on page 4.
I Crystal output. See Crystal Specification on page 4.
I Output enable pin (see OE logic state table on page 1).
I Voltage Control input.
P Ground.
O
LVDS True output for PL502-39
No Connect for PL502-37
O
LVDS Complementary output for PL502-39
LVCMOS out for PL502-37
I
I ^{Multiplier selector pins. These pins have an internal pull-}
up that will default SELx to ‘1’ when not connected to
I _GND.
I
P +3.3V power supply.
ELECTRICAL SPECIFICATIONS
1. Absolute Maximum Ratings
PARAMETERS
SYMBOL
MIN.
MAX. UNITS
Supply Voltage
Input Voltage, dc
Output Voltage, dc
Storage Temperature
Ambient Operating Temperature*
Junction Temperature
Lead Temperature (soldering, 10s)
ESD Protection, Human Body Model
VDD
4.6
V
VI
-0.5
VDD+0.5
V
VO
-0.5
VDD+0.5
V
TS
-65
150
C
TA
-40
85
C
TJ
125
C
260
C
2.5
kV
Exposure of the device under conditions beyond the limits specified by Maximum R atings for extended periods may cause permanent damage to the
device and affect product reliability. These conditions represent a stress rating only, and functional operations of the dev ice at these or any other
conditions above the operational limits noted in this specification is not implied.
* Note: Operating Temperature is guaranteed by design for all parts (COMMERCIAL and INDUSTRIAL), but tested for COMMERCIAL grade on ly.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel [phone] • fax [phone] • www.micrel.com Rev 4/15/13 Page 3