PL500-17 Datasheet, PDF (3/6 Pages) Micrel Semiconductor – Low Phase Noise VCXO (17MHz to 36MHz)

PL500-17
Low Phase Noise VCXO (17MHz to 36MHz)
ELECTRICAL SPECIFICATIONS
1. Absolute Maximum Ratings
PARAMETERS
SYMBOL
MIN.
MAX. UNITS
Supply Voltage
Input Voltage, dc
Output Voltage, dc
Storage Temperature
Ambient Operating Temperature*
Junction Temperature
Lead Temperature (soldering, 10s)
ESD Protection, Machine Model
ESD Protection, Human Body Model
V_DD
4.6
V
V_I
-0.5
V_DD+0.5
V
V_O
-0.5
V_DD+0.5
V
T_S
-65
150
C
T_A
-40
85
C
T_J
125
C
260
C
200
V
2
kV
Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permane nt damage to the
device and affect product reliability. These conditions represent a stress rating only, and functiona l operations of the device at these or any other
conditions above the operational limits noted in this specification is not implied.* Note: Operating Temperature is guaranteed by design for all parts
(COMMERCIAL and INDUSTRIAL), but tested for COMMERCIAL g rade only.
2. Voltage Control Crystal Oscillator
PARAMETERS
SYMBOL
CONDITIONS
MIN. TYP. MAX. UNITS
VCXO Stabilization Time *
VCXO Tuning Range
T_VCXOSTB
From power valid
XTAL C₀/C₁ < 250
0V  VCON  3.3V
10
ms
300
ppm
CLK Output Pullability
VCON=1.65V, 1.65V
150
ppm
VCXO Tuning Characteristic
100
ppm/V
Pull Range Linearity
5
%
Power Supply Rejection
PWSRR Frequency change, V_DD ±10% -1
+1 ppm
VCON Pin Input Impedance
5000
k
VCON Modulation BW
0V  VCON  3.3V, -3dB
18
kHz
Note: Parameters denoted with an asterisk (*) represent nominal characterization data and are not production tested to any specific limits.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel [phone] • fax [phone] • www.micrel.com Rev 6/15/10 Page 3