MIC3002 Datasheet, PDF (17/65 Pages) Micrel Semiconductor – FOM Management IC with Internal Calibr ation

Micrel, Inc.
20-27 32-39 8
28-47 40-71 32
48-57 72-87 16
58-5F 88-95 8
60-86 96-134 39
87-8F
90-9B
9C-9F
A0-AB
AC-AF
B0-BB
135-143 9
144-155 12
156-159 4
160-171 12
172-175 14
176-187 12
BC-BF 188-191 4
C0-CB 192-203 12
CC-CF 204-207 4
D0-DD 208-221 14
DE-FA 222-250 128
FB-FC 251-252 2
FD
253
1
FE
254
1
FF
255
1
MIC3002
POHDATA
RXLUT
CALCOEF
SCRATCH
TCTRLUT
SCRATCH
BIASLUT2
SCRATCH
MODLUT2
SCRATCH
IFTLUT2
SCRATCH
HATLUT2
SCRATCH
RXLUTSEG
SCRATCH
POH
Data Ready Flags
MFG_ID
DEV_ID
Power-on hour meter scratchpad
RX power calibration look-up table. Eight sets of slope and offset
Slope and offset coefficients used for Temperature, Voltage, Bias, and
TXPOWER internal calibration
OEM scratchpad area
LUT to temperature-compensate temperature results and/or
temperature to be used by parameters compensation LUT.
OEM scratchpad area.
Bias temperature compensation L.U.T. additional 12 entries.
OEM scratchpad area
Modulation temperature compensation L.U.T. additional 12 entries.
OEM scratchpad area.
Bias current fault threshold temperature compensation L.U.T. additional
12 entries.
OEM scratchpad area
Bias current high alarm threshold temperature compensation L.U.T.
additional 12 entries.
OEM scratchpad area
RXPWR calibration segments delimiters. Each of the eight segments can
have its own slope and offset.
OEM scratchpad area
Power on hour meter result; read only
Data ready bits for each measured parameter; read only
Manufacturer identification (Micrel = 42 = 2Ah)
Device and die revision
Table 4. OEM Configuration Registers, Serial Address = A6_h
July 2007
17
M9999-073107-B
[e-mail] or [phone]