MIC3002 Datasheet, PDF (15/65 Pages) Micrel Semiconductor – FOM Management IC with Internal Calibr ation

Micrel, Inc.
MIC3002
Address Map
Address(s)
0 –95
96 – 127
128 – 255
Field Size
(Bytes)
96
32
128
Name
Serial ID defined by SEP MSA
Vendor Specific
Reserved
Description
G-P NVRAM; R/W under valid OEM password.
Vendor specific EEPROM
Reserved for future use. G-P NVRAM; R/W under valid OEM
password.
Table 1. MIC3002 Address Map, Serial Address = A0_h
Address(s)
HEX DEC
00-27 0-39
28-37
38-5B
40-55
56-91
5C-5E
5F
60-69
6A-6D
6E
6F
70-71
72-73
74-75
76-77
78-7E
92-94
95
96-105
106-109
110
111
112-113
114-115
116-117
118-119
120-126
7F
80-DD
DE
127
128-221
222
DF-F5
F6
F7
F8-F9
223-245
246
247
248-249
FA-FB 250-251
FC-FE 252-254
FF
255
Field Size
(Bytes)
40
16
36
3
1
10
4
1
1
2
2
2
2
7
1
94
1
23
1
1
2
2
3
1
Name
Alarm and Warning
Threshold
Reserved
Calibration Constants
Reserved
Checksum
Analog Data
Reserved
Control/Status Bits
Reserved
Alarm Flags
Reserved
Warning Flags
Reserved
OEMPW
Vendor Specific
User Scratchpad
ALT_USRCTL
User Scratchpad
USRPWSET
USRPW
Alarms Masks
Warnings Masks
Reserved
USRCTL
Description
High/low limits for warning and alarms; writeable using OEM p/w; read-
only otherwise.
Reserved – do not write; reads undefined.
Numerical constants for external calibration; writeable using OEM p/w;
read-only otherwise.
Reserved – do not write; reads undefined.
G-P NVRAM; writeable using OEM p/w; ready only otherwise.
Real time analog parameter data.
Reserved – do not write; reads undefined.
Control and status bits.
Reserved – do not write; reads undefined.
Alarm status bits; read only.
Reserved – do not write; reads undefined.
Warning status bits; read only.
Reserved – do not write; reads undefined.
OEM password entry field. The OEM password location can be selected
to be 78-7B (120-123) or 7B-7E (123-126) by setting the bit OEMCFG5
bit 2 to 0 (default) or 1.
Vendor specific. Reserved – do not write; reads undefined.
User writeable EEPROM. G-P NVRAM; R/W using any valid password.
Alternate location for USRCTL register. Set bit OEMCFG6-2 to 1 to
select this location. Can be used as a scratch pad if not selected.
User writeable EEPROM. G-P NVRAM; R/W using any valid password.
User password setting; read/write using any p/w; returns zero otherwise.
User password register
Bit =1: corresponding alarm not masked
Bit = 0: corresponding alarm masked
Bit =1: corresponding warning not masked
Bit = 0: corresponding warning masked
Reserved – do not write; reads undefined.
End-user control and status bits If ALT-USRCTL is not selected. Can be
used as a scratch pad if not selected.
Table 2. MIC3002 Address Map, Serial Address = A2_h
July 2007
15
M9999-073107-B
[e-mail] or [phone]