PL138-28 Datasheet, PDF (11/11 Pages) Micrel Semiconductor – 2.5V-3.3V Low-Skew 1-2 Differential PECL Fanout Buffer

PL138-28
2.5V-3.3V Low-Skew 1-2 Differential PECL Fanout Buffer
ORDERING INFORMATION (GREEN PACKAGE)
For part ordering, please contact our Sales Department:
2180 Fortune Drive, San Jose, CA 95131, USA
Tel: [phone] Fax: [phone]
PART NUMBER
The order number for this device is a combination of the following:
Part number, Package type and Operating temperature range
PL138-28 X X - R
Part Number
R=Tape and Reel
Package Type
S=SOP-8
O=TSSOP-8
Part/Order Number
PL138-28SC-R
PL138-28OC-R
*Note: LLLLL designates lot number
Marking
P138-28
SC
LLLLL
P138-28
OC
LLLLL
Temperature Range
C= Commercial (0°C to +70°C)
I= Industrial (-40°C to +85°C)
Package Option
8-Pin SOP (Tape and Reel)
8-Pin TSSOP (Tape and Reel)
Micrel Inc., reserves the right to make changes in its products or specifications, or both at any time without notice. The information furnished by Micrel is believed to be
accurate and reliable. However, Micrel makes no guarantee or warranty concerning the accuracy of said information and shall not be responsible for any loss or damage of
whatever nature resulting from the use of, or reliance upon this product.
LIFE SUPPORT POLICY: Micrel’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the
President of Micrel Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel [phone] • fax [phone] • www.micrel.com Rev 11/26/13 Page 11