KSZ8842-16_08 Datasheet, PDF (103/141 Pages) Micrel Semiconductor – 2-Port Ethernet Switch with Non-PCI Interface

Micrel, Inc.
Bit
Default
7-4
0x0
3-0
0x0
KSZ8842-16/32 MQL/MVL/MVLI/MBL
R/W Description
RW Ingress Pri1 Rate
Priority 1 frames will be discarded after the ingress rate selected as shown below is
reached or exceeded.
0000 = Not limited (default)
0001 = 64Kbps
0010 = 128Kbps
0011 = 256Kbps
0100 = 512Kbps
0101 = 1Mbps
0110 = 2Mbps
0111 = 4Mbps
1000 = 8Mbps
1001 = 16Mbps
1010 = 32Mbps
1011 = 48Mbps
1100 = 64 Mbps
1101 = 72Mbps
1110 = 80Mbps
1111 = 88Mbps
Note: For 10BT, rate settings above 10Mbps are set to the default value 0000 (not
limited).
RW Ingress Pri0 Rate
Priority 0 frames will be discarded after the ingress rate selected as shown below is
reached or exceeded.
0000 = Not limited (default)
0001 = 64Kbps
0010 = 128Kbps
0011 = 256Kbps
0100 = 512Kbps
0101 = 1Mbps
0110 = 2Mbps
0111 = 4Mbps
1000 = 8Mbps
1001 = 16Mbps
1010 = 32Mbps
1011 = 48Mbps
1100 = 64 Mbps
1101 = 72Mbps
1110 = 80Mbps
1111 = 88Mbps
Note: For 10BT, rate settings above 10Mbps are set to the default value 0000 (not
limited).
October 2007
103
M9999-102207-1.9