MLX71121_15 Datasheet, PDF (28/29 Pages) Melexis Microelectronic Systems – FSK/OOK Receiver

MLX71121
300 to 930MHz
FSK/OOK Receiver
7 Standard Information Regarding Manufacturability of Melexis
Products with Different Soldering Processes
Our products are classified and qualified regarding soldering technology, solderability and moisture sensitivi-
ty level according to following test methods:
Reflow Soldering SMD’s (Surface Mount Devices)
 IPC/JEDEC J-STD-020
Moisture/Reflow Sensitivity Classification for Nonhermetic Solid
(classification reflow profiles according to table 5-2)
 EIA/JEDEC JESD22-A113
Preconditioning of Nonhermetic Surface Mount Devices
(reflow profiles according to table 2)
State
Prior
Surface Mount
to Reliability
Devices
Testing
Wave Soldering SMD’s (Surface Mount Devices) and THD’s (Through Hole Devices)
 EN60749-20
Resistance of plastic- encapsulated SMD’s to combined effect of moisture and soldering heat
 EIA/JEDEC JESD22-B106 and EN60749-15
Resistance to soldering temperature for through-hole mounted devices
Iron Soldering THD’s (Through Hole Devices)
 EN60749-15
Resistance to soldering temperature for through-hole mounted devices
Solderability SMD’s (Surface Mount Devices) and THD’s (Through Hole Devices)
 EIA/JEDEC JESD22-B102 and EN60749-21
Solderability
For all soldering technologies deviating from above mentioned standard conditions (regarding peak tempera-
ture, temperature gradient, temperature profile etc) additional classification and qualification tests have to be
agreed upon with Melexis.
The application of Wave Soldering for SMD’s is allowed only after consulting Melexis regarding assurance of
adhesive strength between device and board.
Melexis recommends reviewing on our web site the General Guidelines soldering recommendation
(http://www.melexis.com/Quality_soldering.aspx) as well as trim&form recommendations
(http://www.melexis.com/Assets/Trim-and-form-recommendations-5565.aspx).
Melexis is contributing to global environmental conservation by promoting lead free solutions. For more in-
formation on qualifications of RoHS compliant products (RoHS = European directive on the Restriction Of
the use of certain Hazardous Substances) please visit the quality page on our website:
http://www.melexis.com/quality.aspx
8 ESD Precautions
Electronic semiconductor products are sensitive to Electro Static Discharge (ESD).
Always observe Electro Static Discharge control procedures whenever handling semiconductor products.
39010 71121
Rev. 012
Page 28 of 29
Data Sheet
Mar/15