MLX90288 Datasheet, PDF (18/19 Pages) Melexis Microelectronic Systems – SMD Programmable Linear Hall Sensor IC Featuring Analog Ratiometric Output

MLX90288
SMD Programmable Linear Hall Sensor IC
Featuring Analog Ratiometric Output
10 Recommended Application Diagram
Figure 6: Recommended Application Diagram
The testpins (#5, #6, #7, #8) need to be grounded to avoid the risk of the chip going into testmode because of
RF/noise entering the test controller on these pins. The test input pins have an internal pull-down resistor.
The recommended application diagram is not a mandatory design guide. For better ESD and EMC
performance external components can be modified for as long as the electrical specifications are followed
under Section 5.2. For good EMC performance the components should be placed as close as possible to the
IC.
3901090288
Rev 002
Page 18 of 19
May/12