TH3122 Datasheet, PDF (13/14 Pages) Melexis Microelectronic Systems – K-Bus Transceiver with integrated Voltage Regulator

TH3122
K-Bus Transceiver with integrated Voltage Regulator
Assembly Information
This Melexis device is classified and qualified regarding soldering technology, solderability and moisture sensitivity level,
as defined in this specification, according to following test methods:
IPC/JEDEC J-STD-020
Moisture/Reflow Sensitivity Classification For Nonhermetic Solid State Surface Mount Devices
(classification reflow profiles according to table 5-2)
EIA/JEDEC JESD22-A113
Preconditioning of Nonhermetic Surface Mount Devices Prior to Reliability Testing
(reflow profiles according to table 2)
CECC00802
Standard Method For The Specification of Surface Mounting Components (SMDs) of Assessed Quality
EIA/JEDEC JESD22-B106
Resistance to soldering temperature for through-hole mounted devices
EN60749-15
Resistance to soldering temperature for through-hole mounted devices
MIL 883 Method 2003 / EIA/JEDEC JESD22-B102
Solderability
For all soldering technologies deviating from above mentioned standard conditions (regarding peak temperature,
temperature gradient, temperature profile etc) additional classification and qualification tests have to be agreed upon with
Melexis.
The application of Wave Soldering for SMD’s is allowed only after consulting Melexis regarding assurance of adhesive
strength between device and board.
Based on Melexis commitment to environmental responsibility, European legislation (Directive on the Restriction of the
Use of Certain Hazardous substances, RoHS) and customer requests, Melexis has installed a roadmap to qualify their
package families for lead free processes also.
Various lead free generic qualifications are running, current results on request.
For more information on Melexis lead free statement see quality page at our website:
http://www.melexis.com/html/pdf/MLXleadfree-statement.pdf
ESD Precautions
Electronic semiconductor products are sensitive to Electro Static Discharge (ESD).
Always observe Electro Static Discharge control procedures whenever handling semiconductor products.
3901003122
Rev 004
Page 13
Dec/04