MDT10P64 Datasheet, PDF (8/18 Pages) Micon Design Technology Corporation – 8-bit micro-controller

(18) T2STA : R12
Bit Symbol
1~0 T2CKPS1 0 0 = Prescaler is 1
~
0 1 = Prescaler is 4
T2CKPS0 1 x = Prescaler is 16
2 TMR2ON 0 : TMR2 is off
1 : TMR2 is on
7~3
--
Unimplemented
Function
MDT10P64
(19) SCMBUF : R13
Serial communication port buffer
(20) SCMCTL : R14
Bit Symbol
Function
3~0 SCM3 0 0 0 0 : SCM master mode , clock = Fosc/4
~
0 0 0 1 : SCM master mode , clock = Fosc/16
SCM0 0 0 1 0 : SCM master mode , clock = Fosc/64
0 0 1 1 : SCM master mode , clock = TMR2 output/2
0 1 0 0 : SCM slave mode , clock = SCK pin , /SS control enable
0 1 0 1 : SCM slave mode , clock = SCK pin , /SS control disable
4
CKS 0 : Transmit happens on rising edge , receive on falling edge, Idle state for
clock is low level.
1 : Transmit happens on falling edge , receive on rising edge, Idle state for
clock is high level
5
SCMEN 0 : Disable SCM, then pc3, pc4, pc5 is I/O prot
1 : Enable SCM
6 SCMROI 0 : No overflow
1 : Overflow
7
WCOL 0 : No collision
1 : The SCMBUF is written while it is still transmitting the previous word
(21) CCPL : R15
Capture/Compare/PWM LSB
(22) CCPH : R16
Capture/Compare/PWM MSB
This specification are subject to be changed without notice. Any latest information please preview
http;//www.mdtic.com.tw
P.8
2005/6 V1.4