MDT10P64 Datasheet, PDF (6/18 Pages) Micon Design Technology Corporation – 8-bit micro-controller

(8) PORT C : R07
PC7~PC0, I/O Register
(9) PORT D : R08
PD7~PD0, I/O Register
(10) PORT E : R09
PE2~PE0, I/O Register
(11) PCHLAT : R0A
MDT10P64
(12) INTS ( Interrupt Status Register ) : R0B
Bit Symbol
Function
0
RBIF PORT B change interrupt flag. Set when PB <7:4> inputs change
1
INTF Set when INT interrupt occurs. INT interrupt flag.
2
TIF
Set when TMR0 overflows.
3
RBIE 0 : disable PB change interrupt
1 : enable PB change interrupt
4
INTS 0 : disable INT interrupt
1 : enable INT interrupt
5
TIS
0 : disable TMR0 interrupt
1 : enable TMR0 interrupt
6
PEIE 0 : disable all peripheral interrupt
1 : enable all peripheral interrupt
7
GIS
0 : disable global interrupt
1 : enable global interrupt
(13) PIFB1 (Peripheral Interrupt Flag Bit) : R0C
Bit Symbol
Function
0
TMR1IF TMR1 interrupt flag
0 : TMR1 did not overflow
1 : TMR1 overflowed
1
TMR2IF TMR2 interrupt flag
0 : No TMR2 to T2PER match occurred
1 : TMR2 to T2PER match occurred
2
CCPIF CCP interrupt flag
0 : No TMR1 capture/compare occurred
1 : A TMR1 capture/compare occurred
This specification are subject to be changed without notice. Any latest information please preview
http;//www.mdtic.com.tw
P.6
2005/6 V1.4