MDT10P64 Datasheet, PDF (7/18 Pages) Micon Design Technology Corporation – 8-bit micro-controller

MDT10P64
Bit Symbol
Function
3
SCMIF SCM interrupt flag
0 No read or write has occurred
1 A read or a write has occurred
6~4
--
Unimplemented
7
PCMIF PCM interrupt flag
0 : No R/W operation has taken place
1 : A R/W operation has taken place
(14) TMR1L : R0E
The LSB of the 16-bit TMR1
(15) TMR1H : R0F
The MSB of the 16-bit TMR1
(16) T1STA : R10
Bit Symbol
Function
0 TMR1ON 0 : Stop TMR1
1 : Enable TMR1
1 TMR1CLK 0 : Internal clock (Fosc/4)
1 : External clock from pin PC0
2 /T1SYNC TMR1CLK = 1
0 : Synchronize external clock
1 : Do not synchronize external clock
TMR1CLK = 0
This bit is ignored
3 T1OSCEN 0 : TMR1 Oscillator is shut off
1 : TMR1 Oscillator is enable
5~4 T1CKPS1 1 1 = 1:8 Prescale value
~
1 0 = 1:4 Prescale value
T1CKPS0 0 1 = 1:2 Prescale value
0 0 = 1:1 Prescale value
7~6
--
Unimplemented
(17) TMR2 : R11
TMR2 register
This specification are subject to be changed without notice. Any latest information please preview
http;//www.mdtic.com.tw
P.7
2005/6 V1.4