MDT10P65_11 Datasheet, PDF (6/14 Pages) Micon Design Technology Corporation – 8-bit micro-controller

MDT10P65
0F Unimplemented..
10 Timer1 control register
Bit 0 – Timer1 enable bit
1 – Timer1 clock source select
2 – Timer 1 external clock synchronization control bit
3 – Timer 1 oscillator enable control bit
5-4 – Timer 1 prescaler select bits
7-6 – Unimplemented. Always read as 0.
11-14 Unimplemented.
15
Timer1 compare register
16
Unimplemented.
17
Timer1 compare control register
Bit 7-1 –Unimplemented. Always set as 0.
0 – compare enable bit
18-1F Unimplemented.
20-7F General purpose register
80
Same as register 00.
81
TMR register
Bit 2-0 – Prescaler rate select bits
3 – Prescaler assign bit
4 – Timer 0 edge select bit
5 – Timer 0 clock source select bit
6 – PB0/IRQ interrupt edge select bit
7 – Port B pull-up enable bit.
82-84 Same as 02H-04H.
85
Port A data direction register.
86
Port B data direction register.
87
Port C data direction register.
88
Port D data direction register.
89
Port E data direction register.
Bit 2-0 – Port E data direction register.
7-3 – Unimplemented. Always set as 0.
8A -8B Same as 0AH-0BH.
8C Peripheral interrupt control register 1.
Bit 0 – Timer1 overflow interrupt enable bit.
7-1 – Unimplemented. Always set these bits to 0.
8D Peripheral interrupt control register 2
Bit 6-0 – Unimplemented.
7 – PD port change interrupt enable bit.
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 6
2007/9
Ver. 1.8