MDT10P65_11 Datasheet, PDF (14/14 Pages) Micon Design Technology Corporation – 8-bit micro-controller

(iv) OSC Type＝HF (C=10 p); WDT－Enable PED – Enable
Voltage/Frequency
4M
10 M
20 M
2.3 V
192 uA
396 uA
734uA
2.5 V
222 uA
462 uA
841uA
3.0 V
314 uA
622 uA
1068 uA
4.0 V
532 uA
985 uA
1.62 mA
5.0 V
803 uA
1.40 mA 2.37 mA
5.5 V
1.19 mA 1.81 mA 3.08 mA
MDT10P65
Sleep
1.5 μA
2.2 μA
3.9 μA
9.6 μA
21 μA
30 μA
(G) Pull_High Resistance
@ Input Mode : V_dd＝5.0 V
PA7 PA6 PA5 PA4 PA3 PA2 PA1 PA0
46.7KΩ 46.2KΩ 96.1KΩ 47.6KΩ 47.1KΩ 47.1KΩ 46.7KΩ 46.2KΩ
PB 7~0
26.4KΩ
PC 7~0
92.5KΩ
PD 7~0
92.5KΩ
PE 2~0
92.5KΩ
p.s. : It is only a reference value for the Pull High Resistance, and the accurate
value of the Resistance depends on the various parameter of the Process.
But the variation of the value will be not more than 20%.
(H) Power Edge-detector Reset Voltage (Not in Sleep Mode), @ V_dd＝5.0 V
V_{pr =} 1.2 V ~ 1.5 V
V_pr ﹕V_dd (Power Supply)
(I) The basic WDT time-out cycle time
@Temperature＝25 ℃, the typical value as followings :
Voltage (V) Basic WDT time-out cycle time (ms)
2.3
26.4
3.0
22.8
4.0
20.1
5.0
18.46
5.5
17.9
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 14
2007/9 Ver. 1.8