MAX106CHC-D Datasheet, PDF (9/31 Pages) Maxim Integrated Products – ±5V, 600Msps, 8-Bit ADC with On-Chip 2.2GHz Bandwidth Track/Hold Amplifier

±5V, 600Msps, 8-Bit ADC with On-Chip
2.2GHz Bandwidth Track/Hold Amplifier
Typical Operating Characteristics (continued)
(V_CCA = V_CCI = V_CCD = +5.0V, V_EE = -5.0V, V_CCO = +3.3V, REFIN connected to REFOUT, f_S = 600Msps, T_A = +25°C, unless other-
wise noted.)
DIFFERENTIAL NONLINEARITY
vs. OUTPUT
(LOW-FREQUENCY SERVO-LOOP DATA)
0.5
0.4
0.3
DREADY
0.2
200mV/div
0.1
0
-0.1
-0.2
DATA
200mV/div
-0.3
-0.4
-0.5
0 32 64 96 128 160 192 224 256
OUTPUT CODE
DREADY RISE/FALL TIME,
DATA RISE/FALL TIME
500ps/div
VOLTAGE STANDING-WAVE RATIO
vs. ANALOG INPUT FREQUENCY
1.5
1.4
1.3
1.2
1.1
1.0
0
500 1000 1500 2000 2500
ANALOG INPUT FREQUENCY (MHz)
CONTACT
A1–A4, A6, A7, B1, B2, C1, C2, D1, D2,
D3, G1, H1, J2, J3, K1, K2, K3, L2, L3,
M1, N1, T2, T3, U1, V1, V2, W1–W4
NAME
GNDI
A5, B5, C5, H2, H3, M2, M3, U5, V5, W5
V_CCI
A8, B8, C8, U6, V6, W6
A9, B9, C9, U7, V7, W7
A10, E17, F2, P3, R17, R18
A11, B11, B16, B17, C11, C16, U9, U17,
V9, V17, V18, W9
A12–A19, B19, C19, D19, E19, F19, G19,
H19, J19, K19, L19, M19, N19, P19, T19,
U19, V19, W10–W19
GNDA
V_CCA
TESTPOINT
(T.P.)
GNDD
V_CCO
Pin Description
FUNCTION
Analog Ground—for T/H amplifier, clock distribution, bandgap refer-
ence, and reference amplifier.
Analog Supply Voltage, +5V. Supplies T/H amplifier, clock distribu-
tion, bandgap reference, and reference amplifier.
Analog Ground—For comparator array.
Analog Supply Voltage, +5V. Supplies analog comparator array.
Test Point. Do not connect.
Digital Ground
PECL Supply Voltage, +3V to +5V
_______________________________________________________________________________________ 9