MAX15500 Datasheet, PDF (6/27 Pages) Maxim Integrated Products – Industrial Analog Current/Voltage-Output Conditioners

Industrial Analog Current/
Voltage-Output Conditioners
ELECTRICAL CHARACTERISTICS (continued)
(VAVDD = +24V, VAVSS = -24V, VDVDD = 5.0V, CLOAD = 1nF, CCOMP = 0nF, VREFIN = 4.096V for the MAX15500, VREFIN = 2.5V for
the MAX15501. All specifications for TA = -40NC to +105NC. Typical values are at TA = +25NC, unless otherwise noted.)
PARAMETER
OUTPUT MONITOR (MON)
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Maximum Output Voltage
Output Resistance
OVERTEMPERATURE DETECTION
Overtemperature Threshold
Current mode, see the Output Monitor
section for VMON equations
Voltage mode, see the Output Monitor
section for VMON equations
3
V
3
35
kI
+150
NC
Overtemperature Threshold
Hysteresis
DIGITAL INPUTS (CS1, CS2, SCLK, DIN, OUTDIS, FSSEL, FSMODE)
Input High Voltage
VIH
10
NC
0.7 x
VDVDD
V
Input Low Voltage
VIL
Input Hysteresis
VIHYST
Input Leakage Current
IIN
Input Capacitance
CIN
DIGITAL OUTPUT (DOUT, READY)
Output Low Voltage
VOL
Output High Voltage
VOH
VINPUT = 0V or VDVDD
ISINK = 4mA
ISOURCE = 4mA
0.3 x
VDVDD
V
300
mV
Q0.1 Q1.0 FA
10
pF
VDVDD -
0.5
0.4
V
V
Output Three-State Leakage
Output Three-State Capacitance
Output Short-Circuit Current
DIGITAL INTERRUPT (ERROR)
Interrupt Active Voltage
Interrupt Inactive Leakage
Interrupt Inactive Capacitance
Interrupt Short-Circuit Current
IOZ
COZ
IOSS
VINT
IINTZ
CINTZ
IINTSS
DOUT only
DOUT only
VDVDD = 5.25V
ISINK = 5.0mA
VDVDD = 2.7V
Q0.1 Q10
FA
15
pF
Q150
mA
0.4
V
Q0.1 Q1.0 FA
15
pF
5
30
mA
6   _______________________________________________________________________________________