MAX13046E Datasheet, PDF (5/15 Pages) Maxim Integrated Products – Single- and Dual-Bidirectional Low-Level Translator

Single- and Dual-Bidirectional
Low-Level Translator
TIMING CHARACTERISTICS FOR +1.8V ≤ V_L ≤ V_CC ≤ +3.3V
(+1.8V ≤ V_L ≤ V_CC ≤ +3.3V, R_S = 50Ω, R_L = 1MΩ, C_L = 15pF, T_A = -40°C to +85°C, unless otherwise noted. Typical values are V_CC = +3.3V,
V_L = +1.8V at T_A = +25°C.) (Notes 2, 3, 5)
PARAMETER
I/O V_CC Rise Time
I/O V_CC Fall Time
I/O V_L Rise Time
I/O V_L Fall Time
Propagation Delay
Channel-to-Channel Skew
Maximum Data Rate
SYMBOL
CONDITIONS
t_RVCC
t_FVCC
t_RVL
t_FVL
t_PD-VL-VCC
t_PD-VCC-VL
Push-pull driving, Figure 1a
Push-pull driving, Figure 1a
Push-pull driving, Figure 1b
Push-pull driving, Figure 1b
Push-pull driving, driving I/O V_L
Push-pull driving, driving I/O V_CC
t_SKEW
Push-pull driving, each translator
equally loaded
Push-pull driving
MIN TYP MAX UNITS
15
ns
15
ns
15
ns
15
ns
15
ns
15
10
ns
16
Mbps
Note 2: All units are 100% production tested at T_A = +25°C. Limits over the operating temperature range are guaranteed by design
and not production tested.
Note 3: For normal operation, ensure V_L < (V_CC + 0.3V). During power-up, V_L > (V_CC + 0.3V) does not damage the device.
Note 4: ESD protection is guaranteed by design. To ensure maximum ESD protection, place a 1µF ceramic capacitor between V_CC
and GND. See Typical Application Circuits.
Note 5: Timing is measured using 10% of input to 90% of output.
_______________________________________________________________________________________ 5