DS1088C Datasheet, PDF (5/8 Pages) Maxim Integrated Products – Fixed-Frequency EconoOscillator™

DS1088C
Fixed-Frequency EconoOscillator™
Pin/Bump Configurations
TOP VIEW
DNC DNC PDN GND
8765
DS1088C
EP
+
1 234
OUT VCC VCC GND
TDFN
(3mm x 3mm)
TOP VIEW
+
DS1088C
1
2
A
OUT
GND
B
VCC
PDN
WLP
PIN/BUMP
TDFN-EP
WLP
1
A1
2, 3
B1
4, 5
A2
6
B2
7, 8
—
—
—
Pin/Bump Descriptions
NAME
OUT
V_CC
GND
PDN
DNC
EP
FUNCTION
Oscillator Output
Power Supply
Ground
Active-Low Power-Down. When the pin is high, the oscillator is enabled. When
the pin is low, the oscillator is disabled (power-down mode).
Do Not Connect. The DNC pins are internally connected to ground.
Exposed Pad (TDFN Only). Internally connected to GND. Connect to the ground
plane to minimize noise injection. Not intended for use as the device electrical
ground.
����������������������������������������������������������������� Maxim Integrated Products  5