DS1088C Datasheet, PDF (1/8 Pages) Maxim Integrated Products – Fixed-Frequency EconoOscillator™

19-6186; Rev 0; 3/12
DS1088C
Fixed-Frequency EconoOscillator™
General Description
The DS1088C is a low-cost clock generator that pro-
duces a square-wave output without external timing
components. The fixed-frequency oscillator is available
in a factory-calibrated frequency of 133MHz. The device
has a power-down pin for power-sensitive applications.
Applications
Printers
Copiers
Automotive Telematics
Computer Peripherals
POS Terminals
Cable Modems
Ordering Information appears at end of data sheet.
Features
S Factory-Programmed, 133MHz Square-Wave
Generator
S Single Output
S No External Timing Components Required
S 2.7V to 3.6V Supply
S Power-Down Mode
S Wide Temperature Range (-20°C to +85°C)
Typical Operating Circuit
133MHz
OUTPUT
OUT
DNC
DS1088C
VCC
VCC
DNC
VCC
VCC
PDN
GND
GND
DECOUPLING CAPACITORS
(0.1µF AND 0.01µF)
EconOscillator is a trademark of Maxim Integrated Products, Inc.
For related parts and recommended products to use with this part, refer to: www.maxim-ic.com/DS1088C.related
����������������������������������������������������������������� Maxim Integrated Products  1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.