English
Language : 

DS1088C Datasheet, PDF (2/8 Pages) Maxim Integrated Products – Fixed-Frequency EconoOscillator™
DS1088C
Fixed-Frequency EconoOscillator™
ABSOLUTE MAXIMUM RATINGS
(Voltages relative to ground.)
Voltage Range on VCC..........................................-0.5V to +6.0V
Voltage Range on PDN............................ -0.5V to (VCC + 0.5V)*
Operating Temperature Range........................... -20°C to +85°C
Storage Temperature Range............................. -55°C to +125°C
Lead Temperature (TDFN only; soldering, 10s)..............+300°C
Soldering Temperature (reflow).......................................+260°C
*Not to exceed +6.0V.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional opera-
tion of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
(TA = -20NC to +85NC, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
Supply Voltage
High-Level Input Voltage (PDN)
Low-Level Input Voltage (PDN)
VCC
VIH
VIL
(Note 1)
MIN TYP MAX
2.7
3.6
0.7 x VCC
-0.3
VCC + 0.3
0.3 x VCC
UNITS
V
V
V
DC ELECTRICAL CHARACTERISTICS
(VCC = 2.7V to 3.6V, TA = -20NC to +85NC, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
High-Level Output Voltage (OUT)
VOH
IOH = -4mA, VCC = MIN
Low-Level Output Voltage (OUT)
High-Level Input Current (PDN)
Low-Level Input Current (PDN)
Supply Current (Active)
Standby Current (Power-Down)
VOL
IIH
IIL
ICC
ICCQ
IOL = 4mA
VCC = 3.6V
VIL = 0V
VCC = 3.6V, CL = 15pF, fO = 133MHz
Power-down mode
MIN TYP MAX UNITS
VCC -
0.4
V
0.4
V
1
FA
-1
FA
15
24
mA
10
FA
OSCILLATOR CHARACTERISTICS—TDFN
(VCC = 2.7V to 3.6V, TA = -20NC to +85NC, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
Output Frequency Range
Available
fO
Output Frequency Tolerance
∆fO
fO
VCC = 3.3V, TA = +25NC (Note 2)
Voltage Frequency Variation
∆fV
fO
Over voltage range, TA = +25NC (Note 3)
Temperature Frequency Variation
∆fT
fO
Over temperature
range, VCC = 3.3V
(Notes 4, 5)
-20NC to +25NC
+25NC to +85NC
Frequency Variation Over Voltage
and Temperature
∆fV,T
fO
Over voltage and temperature range
MIN TYP MAX UNITS
133.3
MHz
-0.3
+0.3
%
-0.35
-0.7
-0.5
-1.0
+0.35
%
+0.7
%
+0.5
+1.0
%
����������������������������������������������������������������� Maxim Integrated Products  2