MAX16041 Datasheet, PDF (2/15 Pages) Maxim Integrated Products – Dual-/Triple-/Quad-Voltage, Capacitor-Adjustable, Sequencing/Supervisory Circuits

Dual-/Triple-/Quad-Voltage, Capacitor-
Adjustable, Sequencing/Supervisory Circuits
ABSOLUTE MAXIMUM RATINGS
(All voltages referenced to GND.)
V_CC .........................................................................-0.3V to +30V
EN1–EN4 ....................................................-0.3V to (V_CC + 0.3V)
OUT1–OUT4 ...........................................................-0.3V to +30V
RESET.........................................................-0.3V to (V_CC + 0.3V)
IN1–IN4.......................................................-0.3V to (V_CC + 0.3V)
MR, TOL, TH1, TH0 ....................................-0.3V to (V_CC + 0.3V)
CDLY1–CDLY4 .........................................................-0.3V to +6V
CRESET ......................................................-0.3V to (V_CC + 0.3V)
Input/Output Current (all pins)..........................................±20mA
Continuous Power Dissipation (T_A = +70°C)
16-Pin TQFN (derate 25mW/°C above +70°C) ...........2000mW
20-Pin TQFN (derate 25.6mW/°C above +70°C) ........2051mW
24-Pin TQFN (derate 27.8mW/°C above +70°C) ........2222mW
Operating Temperature Range .........................-40°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Junction Temperature ......................................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V_CC = 2.2V to 28V, T_A = -40°C to +125°C, unless otherwise specified. Typical values are at V_CC = 3.3V and T_A = +25°C.) (Note 1)
PARAMETER
SUPPLY
Operating Voltage Range
Undervoltage Lockout
SYMBOL
V_CC
UVLO
(Note 2)
(Note 2)
CONDITIONS
MIN TYP MAX UNITS
2.2
28.0
V
1.8
1.9
2.0
V
Undervoltage-Lockout Hysteresis UVLO_HYST V_CC falling
V_CC Supply Current
INPUTS (IN_)
IN_ Thresholds (IN_ Falling)
Adjustable Threshold
(IN_ Falling)
IN_ Hysteresis (IN_ Rising)
IN_ Input Resistance
IN_ Input Current
All OUT_ and RESET at ^{VCC = 3.3V}
I_CC
logic-high (IN_ current V_CC = 12V
excluded)
V_CC = 28V
V_TH
V_TH
V_HYST
I_L
3.3V threshold, TOL = GND
3.3V threshold, TOL = V_CC
2.5V threshold, TOL = GND
2.5V threshold, TOL = V_CC
1.8V threshold, TOL = GND
1.8V threshold, TOL = V_CC
1.5V threshold, TOL = GND
1.5V threshold, TOL = V_CC
1.2V threshold, TOL = GND
1.2V threshold, TOL = V_CC
TOL = GND
TOL = V_CC
Fixed threshold
Adjustable threshold only (V_{IN_} = 1V)
50
mV
40
75
47
75
µA
52
80
2.970 3.052 3.135
2.805 2.888 2.970
2.250 2.313 2.375
2.125 2.187 2.250
1.620 1.665 1.710
V
1.530 1.575 1.620
1.350 1.387 1.425
1.275 1.312 1.350
1.080 1.110 1.140
1.020 1.050 1.080
0.492 0.5 0.508
V
0.463 0.472 0.481
0.5
%
500 918
kΩ
-100
+100
nA
2 _______________________________________________________________________________________