MAX16000 Datasheet, PDF (2/26 Pages) Maxim Integrated Products – Low-Voltage, Quad-/Hex-/Octal-Voltage μP Supervisors

Low-Voltage, Quad-/Hex-/Octal-Voltage
µP Supervisors
ABSOLUTE MAXIMUM RATINGS
V_CC, OUT_, IN_, RESET, WDO to GND....................-0.3V to +6V
TOL, MARGIN, MR, SRT, WDI, to GND ..........-0.3V to V_CC + 0.3
Input/Output Current (RESET, MARGIN,
SRT, MR, TOL, OUT_, WDO, WDI) ..............................±20mA
Continuous Power Dissipation (T_A = +70°C)
12-Pin TQFN (derate 16.9mW/°C above +70°C) ........1349mW
16-Pin TQFN (derate 16.9mW/°C above +70°C) ........1349mW
20-Pin TQFN (derate 16.9mW/°C above +70°C) ........1355mW
24-Pin TQFN (derate 16.9mW/°C above +70°C) ........1666mW
16-Pin TSSOP (derate 9.4mW/°C above +70°C) ..........754mW
Operating Temperature Range .........................-40°C to +125°C
Junction Temperature .....................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V_CC = 2.0V to 5.5V, T_A = -40°C to +125°C, unless otherwise specified. Typical values are at V_CC = 3.3V, T_A = +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Operating Voltage Range
Supply Current
UVLO (Undervoltage Lockout)
IN_ (See Table 1)
V_CC
I_CC
V_UVLO
(Note 2)
V_CC = 3.3V, OUT_, RESET not asserted
(Note 3)
V_CC = 5V, OUT_, RESET not asserted
V_CC rising
1.0
5.5
V
45
65
µA
50
70
1.62
1.8
1.98
V
5V threshold, TOL = GND
4.50 4.625 4.75
5V threshold, TOL = V_CC
3.3V threshold, TOL = GND
4.25
2.970
4.375
3.053
4.50
3.135
3.3V threshold, TOL = V_CC
3.0V threshold, TOL = GND
2.805
2.70
2.888
2.775
2.970
2.85
3.0V threshold, TOL = V_CC
2.5V threshold, TOL = GND
2.55
2.250
2.625
2.313
2.70
2.375
Threshold Voltages (IN_ Falling)
V_TH
2.5V threshold, TOL = V_CC
1.8V threshold, TOL = GND
2.125 2.188 2.250
V
1.62 1.665 1.71
1.8V threshold, TOL = V_CC
1.5V threshold, TOL = GND
1.53
1.350
1.575
1.388
1.62
1.425
1.5V threshold, TOL = V_CC
1.2V threshold, TOL = GND
1.275
1.08
1.313
1.11
1.350
1.14
1.2V threshold, TOL = V_CC
0.9V threshold, TOL = GND
1.02
0.810
1.05
0.833
1.08
0.855
0.9V threshold, TOL = V_CC
0.765 0.788 0.810
2 _______________________________________________________________________________________