 English |
|
|
|
|
|
|
|
| MAX1204_12 Datasheet, PDF (2/23 Pages) Maxim Integrated Products – 5V, 8-Channel, Serial, 10-Bit ADC with 3V Digital Interface | |||
| |||
| ◁ |
MAX1204
5V, 8-Channel, Serial, 10-Bit ADC
with 3V Digital Interface
ABSOLUTE MAXIMUM RATINGS
VDD to GND ..............................................................-0.3V to +6V
VL................................................................-0.3V to (VDD + 0.3V)
VSS to GND...............................................................+0.3V to -6V
VDD to VSS ..............................................................-0.3V to +12V
CH0âCH7 to GND ............................(VSS - 0.3V) to (VDD + 0.3V)
CH0âCH7 Total Input Current...........................................±20mA
REF to GND ................................................-0.3V to (VDD + 0.3V)
REFADJ to GND .........................................-0.3V to (VDD + 0.3V)
Digital Inputs to GND .................................-0.3V to (VDD + 0.3V)
Digital Outputs to GND .................................-0.3V to (VL + 0.3V)
Digital Output Sink Current .................................................25mA
Continuous Power Dissipation (TA = +70°C)
PDIP (derate 11.11mW/°C above +70°C) .....................889mW
SSOP (derate 8.00mW/°C above +70°C) .....................640mW
Operating Temperature Ranges
MAX1204_C_P .....................................................0°C to +70°C
MAX1204_E_P ..................................................-40°C to +85°C
Storage Temperature Range .............................-60°C to +150°C
Soldering Temperature (reflow) .......................................+260°C
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +5V ±5%, VL = 2.7V to 3.6V; VSS = 0V or -5V ±5%; fSCLK = 2.0MHz, external clock (50% duty cycle); 15 clocks/conversion
cycle (133ksps); 4.7µF capacitor at REF; TA = TMIN to TMAX; unless otherwise noted.)
PARAMETER
DC ACCURACY (Note 1)
Resolution
Relative Accuracy (Note 2)
Differential Nonlinearity
Offset Error
Gain Error (Note 3)
SYMBOL
CONDITIONS
INL
DNL
MAX1204A
MAX1204B
No missing codes over temperature
MAX1204A
MAX1204B
MAX1204A
MAX1204B
MIN TYP MAX
10
±0.5
±1.0
±1.0
±1.0
±2.0
±1.0
±2.0
Gain Temperature Coefficient
External reference, 4.096V
±0.8
Channel-to-Channel
Offset Matching
±0.1
DYNAMIC SPECIFICATIONS (10kHz sine-wave input, 4.096VP-P, 133ksps, 2.0MHz external clock, bipolar input mode)
Signal-to-Noise + Distortion Ratio SINAD
66
Total Harmonic Distortion
(up to the 5th harmonic)
THD
-70
Spurious-Free Dynamic Range
SFDR
70
Channel-to-Channel Crosstalk
VIN = 4.096VP-P, 65kHz (Note 4)
-75
Small-Signal Bandwidth
-3dB rolloff
4.5
Full-Power Bandwidth
800
UNITS
Bits
LSB
LSB
LSB
LSB
ppm/°C
LSB
dB
dB
dB
dB
MHz
kHz
2
Maxim Integrated
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese