MAX11102_12 Datasheet, PDF (2/30 Pages) Maxim Integrated Products – 2Msps/3Msps, Low-Power, Serial 12-/10-/8-Bit ADCs

MAX11102/03/05/06/10/11/15/16/17
2Msps/3Msps, Low-Power,
Serial 12-/10-/8-Bit ADCs
ABSOLUTE MAXIMUM RATINGS
VDD to GND.............................................................-0.3V to +4V
REF, OVDD, AIN1, AIN2, AIN to GND.........-0.3V to the lower of
(VDD + 0.3V) and +4V
CS, SCLK, CHSEL, DOUT TO GND.............-0.3V to the lower of
(VOVDD + 0.3V) and +4V
AGND to GND.......................................................-0.3V to +0.3V
Input/Output Current (all pins)............................................50mA
Continuous Power Dissipation (TA = +70NC)
6-Pin SOT23 (derate 8.7mW/NC above +70NC)............696mW
10-Pin TDFN (derate 24.4mW/NC above +70NC)........1951mW
10-Pin FMAX (derate 8.8mW/NC above +70NC)........707.3mW
Operating Temperature Range........................ .-40NC to +125NC
Junction Temperature......................................................+150NC
Storage Temperature Range............................. -65NC to +150NC
Lead Temperature (soldering, 10s).................................+300NC
Soldering Temperature (reflow).......................................+260NC
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS (MAX11102/MAX11103)
(VDD = 2.2V to 3.6V, VREF = VDD, VOVDD = VDD. MAX11102: fSCLK = 32MHz, 50% duty cycle, 2Msps. MAX11103: fSCLK = 48MHz,
50% duty cycle, 3Msps. CDOUT = 10pF, TA = -40NC to +125NC, unless otherwise noted. Typical values are at TA = +25NC.)
PARAMETER
DC ACCURACY
Resolution
Integral Nonlinearity
Differential Nonlinearity
Offset Error
Gain Error
Total Unadjusted Error
SYMBOL
CONDITIONS
INL
DNL
OE
GE
TUE
No missing codes
Excluding offset and reference errors
MIN TYP MAX UNITS
12
Bits
Q1
LSB
Q1
LSB
Q0.3 Q3
LSB
Q1
Q3
LSB
Q1.5
LSB
Channel-to-Channel Offset
Matching
Q0.4
LSB
Channel-to-Channel Gain
Matching
Q0.05
LSB
DYNAMIC PERFORMANCE (MAX11103: fAIN_ = 1MHz, MAX11102: fAIN_ = 0.5MHz)
Signal-to-Noise and Distortion
SINAD
MAX11103
MAX11102
Signal-to-Noise Ratio
SNR
MAX11103
MAX11102
Total Harmonic Distortion
THD
MAX11103
MAX11102
Spurious-Free Dynamic Range
SFDR
MAX11103
MAX11102
70
72
dB
70
72.5
70.5
72
dB
70.5
73
-85
-75
dB
-85
-76
76
85
dB
77
85
Intermodulation Distortion
IMD
MAX11103: f1 = 1.0003MHz, f2 = 0.99955MHz
MAX11102: f1 = 500.15kHz, f2 = 499.56kHz
-84
Full-Power Bandwidth
-3dB point
40
Full-Linear Bandwidth
SINAD > 68dB
2.5
Small-Signal Bandwidth
45
Crosstalk
-90
dB
MHz
MHz
MHz
dB
2  
Maxim Integrated