MAX11047 Datasheet, PDF (2/18 Pages) Maxim Integrated Products – 4-/6-/8-Channel, 16-Bit, Simultaneous-Sampling ADCs

4-/6-/8-Channel, 16-Bit,
Simultaneous-Sampling ADCs
ABSOLUTE MAXIMUM RATINGS
AVDD to AGND ........................................................-0.3V to +6V
DVDD to AGND and DGND .....................................-0.3V to +6V
DGND to AGND.....................................................-0.3V to +0.3V
AGNDS to AGND...................................................-0.3V to +0.3V
CH0–CH7 to AGND ...............................................-2.5V to +7.5V
REFIO, RDC to AGND ..................................-0.3V to the lower of
(AVDD + 0.3V) and +6V
EOC, WR, RD, CS, CONVST to AGND.........-0.3V to the lower of
(DVDD + 0.3V) and +6V
DB0–DB15 to AGND ....................................-0.3V to the lower of
(DVDD + 0.3V) and +6V
Maximum Current into Any Pin Except AVDD, DVDD, AGND,
DGND ...........................................................................±50mA
Continuous Power Dissipation (T_A = +70°C)
56-Pin TQFN (derated 36mW/°C above +70°C) ........2222mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(AVDD = 4.75V to 5.25V, DVDD = +2.7V to 5.25V, V_AGNDS = V_AGND = V_DGND = 0V, V_REFIO = internal reference, C_RDC = 4 x 33μF,
C_REFIO = 0.1μF, C_AVDD = 4 x 0.1μF || 10μF, C_DVDD = 3 x 0.1μF || 10μF; all digital inputs at DVDD or DGND, unless otherwise noted.
T_A = -40°C to +85°C, unless otherwise noted. Typical values are at T_A = +25°C.)
PARAMETER
SYMBOL
STATIC PERFORMANCE (Note 1)
Resolution
N
Integral Nonlinearity
INL
Integral Nonlinearity
INL
Differential Nonlinearity
DNL
Differential Nonlinearity
DNL
No Missing Codes
Offset Error
Offset Temperature Coefficient
Channel Offset Matching
Gain Error
Positive Full-Scale Error
Positive Full-Scale Error Matching
Channel Gain-Error Matching
Gain Temperature Coefficient
DYNAMIC PERFORMANCE (Note 4)
Signal-to-Noise Ratio
SNR
Signal-to-Noise and Distortion Ratio SINAD
Spurious-Free Dynamic Range
SFDR
Total Harmonic Distortion
THD
Channel-to-Channel Crosstalk
CONDITIONS
(Note 2)
(Note 3)
(Note 2)
(Note 3)
Between all channels
f_IN = 10kHz, full-scale input
f_IN = 10kHz, full-scale input
f_IN = 10kHz, full-scale input
f_IN = 10kHz, full-scale input
f_IN = 60Hz, full scale and ground on
adjacent channel (Note 5)
MIN
TYP
MAX UNITS
16
Bits
-2
±0.6
+2
LSB
±0.8
LSB
> -1
±0.6 < +1.3 LSB
±0.7
LSB
16
Bits
±0.002 ±0.01 %FSR
±2.4
μV/°C
±0.01 %FSR
±0.03 %FSR
±0.02 %FSR
±0.02 %FSR
±0.03 %FSR
±0.8
ppm/°C
91
92.3
dB
90.5
92
dB
95
106
dB
-105
-95
dB
-126
-100
dB
ANALOG INPUTS (CH0–CH7)
Input Voltage Range
Input Leakage Current
(Note 6)
1.22 x
0
V_REFIO
V
-1
+1
μA
2 _______________________________________________________________________________________