English
Language : 

MAX1011 Datasheet, PDF (2/12 Pages) Maxim Integrated Products – Low-Power, 90Msps, 6-Bit ADC
Low-Power, 90Msps, 6-Bit ADC
ABSOLUTE MAXIMUM RATINGS
VCC to GND ..........................................................-0.3V to +6.5V
VCCO to OGND......................................................-0.3V to +6.5V
GND to OGND ......................................................-0.3V to +0.3V
Digital and Clock Output Pins to OGND...-0.3V to VCCO (10sec)
All Other Pins to GND...............................................-0.3V to VCC
Continuous Power Dissipation (TA = +70°C)
24-Pin QSOP (derate 10mW/°C above +70°C)...........800mW
Operating Temperature Range...............................0°C to +70°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, <10sec)...........................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(VCC = +5V ±5%, VCCO = 3.3V ±300mV, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP
DC ACCURACY (Note 1)
Resolution
RES
6
Integral Nonlinearity
INL
-0.5 ±0.25
Differential Nonlinearity
DNL No missing codes over temperature
-0.5 ±0.25
VFSH GAIN = VCC (high gain)
Full-Scale Input Range
VFSM GAIN = open (mid gain)
VFSL GAIN = GND (low gain)
INVERTING AND NONINVERTING ANALOG INPUTS
118.75 125
237.5 250
475
500
Input Open-Circuit Voltage
Input Resistance
Input Capacitance
VAOC
RIN
CIN
Guaranteed by design
2.25 2.35
13
20
1.5
Common-Mode Voltage Range
VCM
Other analog input driven with external source
(Note 2)
1.75
OSCILLATOR INPUTS
Oscillator Input Resistance
DIGITAL OUTPUTS (D0–D5)
ROSC Other oscillator input tied to VCC + 0.3V
4.8
8
Digital Outputs Logic-High
Voltage
VOH
ISOURCE = 50µA
0.7VCCO
Digital Outputs Logic-Low
Voltage
VOL
ISINK = 400µA
POWER SUPPLY
Supply Current
ICC
37
Power-Supply Rejection Ratio
PSRR VCC = 4.75V to 5.25V (Note 3)
-65
Digital Outputs Supply Current
ICCO
20MHz, full-scale analog inputs,
CL = 15pF (Note 4)
8.5
Power Dissipation
PD
215
MAX UNITS
0.5
0.5
131.25
262.5
525
Bits
LSB
LSB
mVp-p
2.45
V
29
kΩ
3
pF
2.75
V
12.1
kΩ
V
0.5
V
63.5 mA
-40
dB
13.8 mA
mW
2 _______________________________________________________________________________________